STM32F407VET6 Hat Pin Header Adapter
About the STM32F407VET6 Hat Pin Header Adapter
STM32F407VET6 Hat Pin Header Adapter is an open source PCB design by gianlucarenzi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 72.4 × 85.2 mm, with 18 components from 8 distinct parts.
By type, the board carries 6 connectors, 6 diodes and 6 resistors.
It belongs with the keyboards and dev boards & breakouts designs in this gallery.
From the project
ATARI XE Replacement Keyboard
STM32F407VET6 Hat Pin Header Adapter bill of materials (BOM)
18 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x16_Odd_Even | PinSocket_2x16_P2.54mm_Vertical | J1 |
| 2 | Conn_02x24_Odd_Even | PinSocket_2x24_P2.54mm_Vertical | J2, J3 |
| 1 | Conn_02x17_Counter_Clockwise | IDC-Header_2x17_P2.54mm_Vertical | J4 |
| 1 | Conn_01x32 | MOLEX-FFC-1.25mm-RA-52044-3245 | J5 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 6 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6 |
| 1 | 330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1 |
| 5 | 510R | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R3, R4, R5, R6 |
STM32F407VET6 Hat Pin Header Adapter design files
The KiCad project lives in the gianlucarenzi/A130KB_MX repository on GitHub; these links point at the commit this page was built from.
STM32F407VET6 Hat Pin Header Adapter: common questions
How big is the STM32F407VET6 Hat Pin Header Adapter?
The STM32F407VET6 Hat Pin Header Adapter measures 72.4 × 85.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F407VET6 Hat Pin Header Adapter?
18 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32F407VET6 Hat Pin Header Adapter design files?
From the gianlucarenzi/A130KB_MX repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the STM32F407VET6 Hat Pin Header Adapter design in my own project?
Yes, under the terms of its GPL-3.0 license, which gianlucarenzi chose for the repository.
More boards in A130KB_MX
Atari keyboard tester
129.5 × 125.1 mm110 parts2LGPL-3.014
130MX Keyboard
329.2 × 129.3 mm78 parts2LGPL-3.014
ATARI XE KEYBOARD
329 × 131 mm75 parts2LGPL-3.014
Atari 130MX Plate
308 × 128.5 mm65 parts2LGPL-3.014
CX85 AtariXE
165 × 115.4 mm26 parts2LGPL-3.014
Atari130MX-adapter
73.4 × 15.5 mm4 parts2LGPL-3.014
Similar boards
Lily58 Pro BOTTOM
kata0510
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Lite Rev3 TOP Case
142.5 × 106.4 mm34 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k