STM32F4XX
gianlucarenzi·STM32F4XX·STM32F401/STM32F4XX.kicad_pcb
About the STM32F4XX PCB
STM32F4XX is an open source STM32 PCB design by gianlucarenzi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 63 × 49.2 mm, with 36 components from 22 distinct parts.
Its main chip is the STM32F401RCT6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 14 capacitors, 9 resistors, 5 connectors, 2 ICs, 2 LEDs and 1 crystal.
It belongs with the usb & debug tools designs in this gallery.
From the project
A generic development board for the STM32F401 microcontroller.
A generic development board for the STM32F401 microcontroller.
This project provides a development board for the STM32F401RCT6 microcontroller in a LQFP-64 package. The board is designed to be a standard platform for developing and prototyping applications with this MCU. It includes basic components and connectors to get started quickly.
STM32F401RCT6 microcontroller USB-C connector for power and data SWD connector for programming and debugging Reset button JP1 jumper (for DFU mode) User LED Power LED Expansion headers for all MCU pins

Main components on the STM32F4XX
STM32F4XX bill of materials (BOM)
36 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401RCT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | 8MHzC | Crystal_SMD_HC49-SD | Y1 |
| 1 | DEBUG UART | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 2 | CONN_02x16_PIN_SMD_Odd_Even_2.54mm | PinHeader_2x16_P2.54mm_Vertical_SMD | J2, J4 |
| 1 | DX07S016JA1R1500 | JAE_DX07S016JA1R1500 | J3 |
| 1 | CONN_SMD_HEADER_BOX_02x05_Odd_Even_2.54mm | IDC-Header_2x05_P2.54mm_Vertical_SMD | J5 |
| 1 | ~BOOTLOADER | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | ~RESET | SPST-7.3x3.9x2.5-WUERTH-434121025816 | SW1 |
| 1 | RED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LD1 |
| 1 | GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LD2 |
| 1 | 90R@100MHZ | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 9 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C7, C11, C12 +1 |
| 2 | 10uF | CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C6, C14 |
| 1 | 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 2 | 22pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 1 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 2 | 0R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R9 |
| 2 | 5K1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R6 |
| 2 | 22R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 330R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 470R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
STM32F4XX design files
The KiCad project lives in the gianlucarenzi/STM32F4XX repository on GitHub; these links point at the commit this page was built from.
STM32F4XX: common questions
What microcontroller does the STM32F4XX use?
The STM32F4XX is built around the STM32F401RCT6, from the STM32 family.
How big is the STM32F4XX PCB?
The STM32F4XX measures 63 × 49.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F4XX?
36 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F4XX design files?
From the gianlucarenzi/STM32F4XX repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32F4XX design in my own project?
Yes, under the terms of its GPL-3.0 license, which gianlucarenzi chose for the repository.
Can I test firmware for the STM32F4XX without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k