5 open source boards using the STM32F401RCT6

Real designs built with the STM32F401RCT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the STM32F401RCT6

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F401RCT6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF).
  • The VBAT pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF).
  • The PH0 pin has a crystal on 4 of 5 designs, most often 16 MHz.
  • The PH0 pin has a capacitor to GND on 4 of 5 designs, most often 22 pF (then 15 pF).
VBATpin 1Connected to: 3.3V 60% · GND 20% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (7), 4.7 µF (1)
PH0pin 5Connected to: Signal 80% · not connected 20%
  • Crystal on 80% · 16 MHz (1)
  • Capacitor to GND on 80% · 22 pF (1), 15 pF (1), 12 pF (1)
PH1pin 6Connected to: Signal 80% · not connected 20%
  • Crystal on 60%
  • Capacitor to GND on 60% · 22 pF (1), 15 pF (1), 10 pF (1)
NRSTpin 7Connected to: A connector 40%
  • Capacitor to GND on 80% · 100 nF (4)
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
VSSApin 12Connected to: GND 100%
VREF+pin 13Connected to: 3.3V 60% · not connected 20% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (2), 10 nF (2), 10 µF (1)
  • Inductor on 40% · 39 nH (1)
VSSpin 18, 31, 47, 63Connected to: GND 100%
VDDpin 19, 32, 48, 64Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (28), 4.7 µF (4), 10 nF (2)
PB10pin 29Connected to: Not connected 60% · a signal 40%
VCAP1pin 30Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 4.7 µF (3), 2.2 µF (1)
PB13pin 34Connected to: Not connected 60% · a signal 40%
PB14pin 35Connected to: Not connected 60% · a signal 40%
PA10pin 43Connected to: Not connected 60% · a signal 40%
PA12pin 45Connected to: A connector 60%, USBLC6-2SC6 40% · not connected 20%
  • Pull-up to 3.3V on 40% · 1.5 kΩ (2)
PA15pin 50Connected to: Not connected 60% · a signal 40%
PD2pin 54Connected to: Not connected 60% · a signal 40%
BOOT0pin 60Connected to: Signal 80% · GND 20%
  • Series resistor on 60% · 10 kΩ (3), 330 kΩ (1)
  • Resistor to GND on 40% · 1 MΩ (1), 10 kΩ (1)
PB8pin 61Connected to: Not connected 60% · a signal 40%
PB9pin 62Connected to: Not connected 60% · a signal 40%

39 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32F4XX by gianlucarenzi, Athena by BenjaminJAnderson, HWCorso by GiovanniRaseraF and GPIO CTRL by k16shikano.

The STM32F401RCT6 in open source designs

The gallery holds 5 open source boards using the STM32F401RCT6 from 5 GitHub repositories; a typical one measures about 70 × 61 mm and carries around 44 components.

60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is STM32F4XX by gianlucarenzi.

Parts used alongside the STM32F401RCT6

Microcontrollers on boards using the STM32F401RCT6

What boards using the STM32F401RCT6 are built for

STM32F401RCT6: common questions

Where can I find a STM32F401RCT6 reference design?

Each of the 5 boards on this page is a real design using the STM32F401RCT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F401RCT6 VDD pin?

The VDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F401RCT6.

What decoupling capacitors do designs use on the STM32F401RCT6 VBAT pin?

The VBAT pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F401RCT6.

How is the STM32F401RCT6 PH0 pin connected?

The PH0 pin has a crystal on 4 of 5 designs, most often 16 MHz. Counted from the KiCad layouts of 5 open source designs using the STM32F401RCT6.

Which microcontrollers do boards using the STM32F401RCT6 use?

Most are built on STM32 (5).

How big is a typical board using the STM32F401RCT6?

The median is 70 × 61 mm, and 60% are two-layer designs.

What is the most popular open source board using the STM32F401RCT6?

By GitHub stars, STM32F4XX by gianlucarenzi, with 2 stars.

Can I simulate one of these boards using the STM32F401RCT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part