LM plateau

Gokay-git·Projet-Levitation_magnetique·Hardware/LM_plateau/LM_plateau.kicad_pcb

LM plateau PCB layout, top view — open source board by Gokay-git

About the LM plateau PCB

LM plateau is an open source PCB design by Gokay-git, published on GitHub. It is a 2-layer board measuring 40 × 40 mm, with 7 components from 3 distinct parts.

Other key parts include the DRV5055A4 (SOT-23). By type, the board carries 3 ICs, 3 capacitors and 1 connector.

From the project

Lévitation magnétique 2 axes : cartes KiCad, firmware STM32 (NUCLEO-L476RG) et outil de réglage

Chaque dossier contient le projet (.kicadpro), le schéma (.kicadsch), le routage (.kicadpcb) et la nomenclature (nomenclature.csv, affichée sous forme de tableau par GitHub). Les schémas sont aussi en PDF, lisibles sans KiCad, dans Docs/schemas`.

À prévoir en plus, hors cartes : - 1 carte NUCLEO-L476RG ; - 1 câble JST-XH 6 points entre les deux cartes, câblé 1 vers 1 (2 boîtiers XHP-6 et 12 contacts, ou câble pré-serti) ; - 1 alimentation 12 V continue (la carte est protégée par un fusible 2 A temporisé) ; - 8 vis M3 et entretoises (4 trous de fixation par carte) ; - les 4 bobines et les…

LM plateau, from the project README
From the project README

Main components on the LM plateau

DRV5055A4 (SOT-23)

LM plateau bill of materials (BOM)

7 components, 3 distinct parts.

QtyPartRefs
3
DRV5055A4 (SOT-23)
U1, U2, U3
1
Vers carte puissance (JST-XH)
J1
3
100nF
C1, C2, C3

LM plateau design files

The KiCad project lives in the Gokay-git/Projet-Levitation_magnetique repository on GitHub; these links point at the commit this page was built from.

LM plateau: common questions

How big is the LM plateau PCB?

The LM plateau measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LM plateau?

7 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the LM plateau design files?

From the Gokay-git/Projet-Levitation_magnetique repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LM plateau design in my own project?

The repository has no license, so all rights stay with Gokay-git. Use it as a reference, and ask the author before reusing the design.

More boards in Projet-Levitation_magnetique