LM puissance
Gokay-git·Projet-Levitation_magnetique·Hardware/LM_puissance/LM_puissance.kicad_pcb
About the LM puissance PCB
LM puissance is an open source PCB design by Gokay-git, published on GitHub. It is a 2-layer board measuring 175 × 70 mm, with 69 components from 35 distinct parts.
Other key parts include the L7805, L293D and INA240A1D. By type, the board carries 24 capacitors, 15 resistors, 8 connectors, 7 ICs, 6 test points and 1 transistor.
From the project
Lévitation magnétique 2 axes : cartes KiCad, firmware STM32 (NUCLEO-L476RG) et outil de réglage
Chaque dossier contient le projet (.kicadpro), le schéma (.kicadsch), le routage (.kicadpcb) et la nomenclature (nomenclature.csv, affichée sous forme de tableau par GitHub). Les schémas sont aussi en PDF, lisibles sans KiCad, dans Docs/schemas`.
À prévoir en plus, hors cartes : - 1 carte NUCLEO-L476RG ; - 1 câble JST-XH 6 points entre les deux cartes, câblé 1 vers 1 (2 boîtiers XHP-6 et 12 contacts, ou câble pré-serti) ; - 1 alimentation 12 V continue (la carte est protégée par un fusible 2 A temporisé) ; - 8 vis M3 et entretoises (4 trous de fixation par carte) ; - les 4 bobines et les…

Main components on the LM puissance
LM puissance bill of materials (BOM)
69 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 2 | L293D | DIP-16_W7.62mm_Socket | U2, U3 |
| 4 | INA240A1D | SOIC-8_3.9x4.9mm_P1.27mm | U4, U5, U6, U7 |
| 1 | IRF4905 | TO-220-3_Vertical | Q1 |
| 1 | Entrée 12 V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Nucleo CN7 | PinHeader_2x19_P2.54mm_Vertical | J2 |
| 1 | Plateau (JST-XH) | JST_XH_S6B-XH-A_1x06_P2.50mm_Horizontal | J3 |
| 1 | Bobine X1 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Bobine X2 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | Bobine Y1 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | Bobine Y2 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | Nucleo CN10 | PinHeader_2x19_P2.54mm_Vertical | J8 |
| 1 | 15 V (BZT52C15) | D_SOD-123 | DZ1 |
| 1 | 2 A temporisé | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 4 | 0R1 1% 1W | R_2512_6332Metric | RS1, RS2, RS3, RS4 |
| 1 | +12V | TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | +5V | TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 1 | GND | TestPoint_Loop_D2.50mm_Drill1.0mm | TP3 |
| 1 | HALL_1 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP4 |
| 1 | HALL_2 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP5 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HALL_3 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP6 |
| 1 | Verte | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED1 |
| 1 | SMBJ15A (TVS) | D_SMB | D1 |
| 1 | 1000µF 35V | CP_Radial_D10.0mm_P5.00mm | C1 |
| 6 | 100nF 50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C6, C7, C9, C10 |
| 1 | 330nF 50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10µF 16V | CP_Radial_D5.0mm_P2.00mm | C5 |
| 2 | 47µF 35V | CP_Radial_D6.3mm_P2.50mm | C8, C11 |
| 9 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C14, C15, C20, C23, C24, C25 +1 |
| 4 | 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C17, C18, C19 |
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R5, R6 |
| 1 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 7 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R10, R11, R12, R13 |
| 1 | 68k 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 10k 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
LM puissance design files
The KiCad project lives in the Gokay-git/Projet-Levitation_magnetique repository on GitHub; these links point at the commit this page was built from.
LM puissance: common questions
How big is the LM puissance PCB?
The LM puissance measures 175 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LM puissance?
69 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the LM puissance design files?
From the Gokay-git/Projet-Levitation_magnetique repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LM puissance design in my own project?
The repository has no license, so all rights stay with Gokay-git. Use it as a reference, and ask the author before reusing the design.