Tagmod hw

goliothlabs·tagmod-hw

Tagmod hw PCB layout, top view — open source board by goliothlabs

About the Tagmod hw PCB

Tagmod hw is an open source PCB design by goliothlabs, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 21.1 × 27.3 mm, with 22 components from 15 distinct parts.

Other key parts include the AMS1117-ADJOFC, F.0603.00139/P2-0603R1TS2-06T-002 and GT-USB-7010ASV. By type, the board carries 11 resistors, 4 ICs, 3 connectors, 2 diodes and 2 capacitors.

From the project

TagMod is a small companion/adapter PCB ("mod") for a SEGGER J-Link debug probe. It plugs into the J-Link's 20-pin ARM JTAG/SWD header (J101) and re-fans the signals out to a target-side 10-pin header (J103) plus a dedicated UART header (J1), and it can supply the target with a r

TagMod is a small companion/adapter PCB ("mod") for a SEGGER J-Link debug probe. It plugs into the J-Link's 20-pin ARM JTAG/SWD header (J101) and re-fans the signals out to a target-side 10-pin header (J103) plus a dedicated UART header (J1), and it can supply the target with a resistor-selectable 1.8 V / 3.3 V rail generated on-board from a USB-C 5 V input.

Main components on the Tagmod hw

AMS1117-ADJOFCF.0603.00139/P2-0603R1TS2-06T-002GT-USB-7010ASV

Tagmod hw bill of materials (BOM)

22 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-ADJOFC
U1
2
F.0603.00139/P2-0603R1TS2-06T-002
U2, U3
1
GT-USB-7010ASV
U4
1
Conn_01x03_Pin
J1
1
Conn_ARM_JTAG_SWD_20
J101
1
Conn_ARM_JTAG_SWD_10
J103
2
CUS10S30,H3F
D1, D2
1
CL21A106KAYNNNE
C1
1
CL10B224KA8NNNC
C2
3
5K1
R2, R3, R4
1
2K7
R5
1
10K
R6
1
22K7
R7
1
6K1
R8
4
0
R67, R68, R69, R70

Tagmod hw design files

The KiCad project lives in the goliothlabs/tagmod-hw repository on GitHub; these links point at the commit this page was built from.

Tagmod hw: common questions

How big is the Tagmod hw PCB?

The Tagmod hw measures 21.1 × 27.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tagmod hw?

22 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Tagmod hw design files?

From the goliothlabs/tagmod-hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Tagmod hw design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which goliothlabs chose for the repository.