BluePill
Gondolindrim·BluePill·PCB_Files/bluepill.kicad_pcb
About the BluePill PCB
BluePill is an open source STM32 PCB design by Gondolindrim, published on GitHub under the Custom license license. It is a 2-layer board measuring 21.3 × 53.3 mm, with 31 components from 22 distinct parts.
Its main chip is the STM32F103x8_B-LQFP48, from the STM32 family. Other key parts include the TPS709xxDBV and USBLC6-2SC6. By type, the board carries 9 capacitors, 8 resistors, 5 connectors, 3 ICs, 1 crystal and 1 fuse.
From the project
Acheron BluePill official repository
See this page for the Acheron Blue Pill documentation.
This project is released under the Acheron Open-Hardware License V1.1. For the license, please refer to the LICENCE.md file.

Main components on the BluePill
BluePill bill of materials (BOM)
31 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103x8_B-LQFP48 | UQFN-48-1EP_6x6mm_P0.4mm_EP4.62x4.62mm | U1 |
| 1 | TPS709xxDBV | SOT-23-5 | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | 16MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | TYPE-C-31-M12_13 | TYPE-C-31-M-12 | J1 |
| 2 | Conn_01x20_Female | HEADER_20PIN | J2, J3 |
| 1 | Conn_01x06_Female | HEADER_6PIN_HORIZONTAL | J4 |
| 1 | Conn_01x04_Female | HEADER_4PIN | J5 |
| 1 | 1.0A trip | Fuse_0603_1608Metric | F1 |
| 2 | 5.1k | R_0402_1005Metric | RCC1, RCC2 |
| 1 | SW_Push | smdPushBtn | SW1 |
| 1 | D_Schottky_Small | D_0603_1608Metric | D1 |
| 2 | 100n | C_0402_1005Metric | C1, C6 |
| 2 | 1u | C_0402_1005Metric | C2, C4 |
| 2 | 10u | C_0402_1005Metric | C3, C5 |
| 1 | 4.7n | C_0402_1005Metric | C7 |
| 2 | 12p | C_0402_1005Metric | C8, C9 |
| 2 | 22R | R_0402_1005Metric | R1, R2 |
| 3 | 100k | R_0402_1005Metric | R3, R4, R7 |
| 1 | 10k | R_0402_1005Metric | R5 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1M | R_0402_1005Metric | R6 |
| 1 | 330R | R_0402_1005Metric | R8 |
BluePill design files
The KiCad project lives in the Gondolindrim/BluePill repository on GitHub; these links point at the commit this page was built from.
BluePill: common questions
What microcontroller does the BluePill use?
The BluePill is built around the STM32F103x8_B-LQFP48, from the STM32 family.
How big is the BluePill PCB?
The BluePill measures 21.3 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BluePill?
31 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the BluePill design files?
From the Gondolindrim/BluePill repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the BluePill design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the BluePill without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k