HardLabs

Pcb files

Govind2442·pcb-files

Pcb files layout, top view — open source AVR/Arduino board by Govind2442

About the Pcb files

Pcb files is an open source AVR/Arduino PCB design by Govind2442, published on GitHub. It is a 2-layer board measuring 84.8 × 55 mm, with 14 components from 7 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 4 resistors, 3 switches, 3 capacitors, 2 ICs, 1 module and 1 LED.

Main components on the Pcb files

Arduino_Nano_v3.x

Pcb files bill of materials (BOM)

14 components, 7 distinct parts.

QtyPartRefs
1
~
U1
1
~
U2
1
Arduino_Nano_v3.x
A1
3
SW_Push
SW1, SW2, SW3
1
LED
PCB-1
3
100n
C1, C2, C3
4
1k
R1, R2, R3, R4

Pcb files design files

The KiCad project lives in the Govind2442/pcb-files repository on GitHub; these links point at the commit this page was built from.

Pcb files: common questions

What microcontroller does the Pcb files use?

The Pcb files is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Pcb files?

The Pcb files measures 84.8 × 55 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb files?

14 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb files design files?

From the Govind2442/pcb-files repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb files design in my own project?

The repository has no license, so all rights stay with Govind2442. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pcb files without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards