PeRci
graysam·PeRci·hardware_kicad/detonator trigger.kicad_pcb
About the PeRci PCB
PeRci is an open source PCB design by graysam, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 79 × 65 mm, with 16 components from 15 distinct parts.
Other key parts include the NE555P. By type, the board carries 4 capacitors, 4 resistors, 2 connectors, 2 switches, 1 IC and 1 transistor.
From the project
ESP32-S3 Firmware and Web/App to manage HV discharge initiator for big bada-booms.
Firmware for ESP32 boards hosting a minimal web UI to safely arm and trigger a high‑voltage initiator. AsyncTCP + ESPAsyncWebServer power a WebSocket control channel; configuration persists via Preferences.
Main components on the PeRci
PeRci bill of materials (BOM)
16 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | IRLI530N | TO-220-3_Vertical | Q1 |
| 1 | Relay_Fire | PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J1 |
| 1 | + Battery (5-15V) - | Banana_Jack_2Pin | J3 |
| 1 | 1M | Potentiometer_16mm-Alpha_Bourns_Omega-Single_Horizontal | RV1 |
| 1 | BTN_FIRE | SW_PUSH-12mm | SW1 |
| 1 | ARM | Switch_Toggle_SPDT_SubMini | SW2 |
| 1 | Ignition Coil Xformer | Banana_Jack_2Pin | T1 |
| 1 | 100p | C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C1 |
| 1 | 10n | C_Disc_D6.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 100n | C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C3 |
| 1 | 10000uF, 40V | CP_Radial_D25.0mm_P10.00mm_SnapIn | C4 |
| 1 | 100 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 7.5k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 2 | 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4 |
PeRci design files
The KiCad project lives in the graysam/PeRci repository on GitHub; these links point at the commit this page was built from.
PeRci: common questions
How big is the PeRci PCB?
The PeRci measures 79 × 65 mm, has 2 copper layers and is 1.58 mm thick.
How many components are on the PeRci?
16 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the PeRci design files?
From the graysam/PeRci repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PeRci design in my own project?
Yes, under the terms of its GPL-3.0 license, which graysam chose for the repository.