Santas sequencer
guilhermegch·santas-sequencer·kicad_project/santas_sequencer.kicad_pcb
About the Santas sequencer PCB
Santas sequencer is an open source PCB design by guilhermegch, published on GitHub. It is a 2-layer board measuring 94.8 × 56 mm, with 41 components from 12 distinct parts.
Other key parts include the CD4017. By type, the board carries 19 resistors, 15 diodes, 2 transistors, 2 capacitors, 1 IC and 1 battery holder.
It belongs with the wearables designs in this gallery.
From the project
Project for PCB Badge challenge, organized by the Brazillian Computer Engineer and Youtuber Julia (@juliallabs), from the channel Laboratório da Julia (Julia's Lab).
My project idea is to make a simple ornament. Its implementation is made with a Johnson decade counter IC, the CD4017, to create a sequencer. The clock circuitry was made by transistors, creating an Astable Multivibrator.
To a more complete info about the design, circuit calculations and how it works, check the documentation pdf file.
On images folder, there's the original .svg draws and the .dxf files, accepted by the Kicad software.

Main components on the Santas sequencer
Santas sequencer bill of materials (BOM)
41 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CD4017 | SO-16_5.3x10.2mm_P1.27mm | U1 |
| 2 | BC847 | SOT-23 | Q1, Q2 |
| 1 | Battery_Cell | BatteryHolder_ComfortableElectronic_CH273-2450_1x2450 | BT1 |
| 1 | SW_DPDT_x2 | DPDT_Switch_6_terminals | SW1 |
| 10 | Red | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 5 | White | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D11, D12, D13, D14, D15 |
| 1 | 10uF | CP_Elec_4x5.8 | C1 |
| 1 | 47uF | CP_Elec_6.3x7.7 | C2 |
| 2 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 1 | 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 22k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 15 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R9, R10, R11, R12 +7 |
Santas sequencer design files
The KiCad project lives in the guilhermegch/santas-sequencer repository on GitHub; these links point at the commit this page was built from.
Santas sequencer: common questions
How big is the Santas sequencer PCB?
The Santas sequencer measures 94.8 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Santas sequencer?
41 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Santas sequencer design files?
From the guilhermegch/santas-sequencer repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Santas sequencer design in my own project?
The repository has no license, so all rights stay with guilhermegch. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k