8 open source boards using the CD4017
Real designs built with the CD4017, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Twangilizer
shannon-greenlight
101.3 × 110 mm454 parts4LNo license1OptoTACH
maheen-ahmed1
100 × 100 mm95 parts2LMIT0Exponential signal generator
jb-23
85 × 56 mm59 parts2LNo license0Santas sequencer
guilhermegch
94.8 × 56 mm41 parts2LNo license0Blinky-Board---555-Chaser
LinoSchibig
98.4 × 51.4 mm17 parts2LNo license0- schematic only · 19 parts
Harmonia
filosganga
19 partsApache-2.00 Pipes main
shannon-greenlight
70.8 × 110 mm207 parts4LNo license207 seq10
bmurauer
40 × 108 mm70 parts2LNo license0
How designs wire the CD4017
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the CD4017 connects to, and the resistors, capacitors and other passives placed on it.
- The CKEN pin is tied to GND on 7 of 7 designs.
- The COUT pin is left unconnected on 5 of 7 designs (a signal on 2).
- The Q1 pin has a series resistor on 4 of 7 designs, most often 100 Ω (then 1 kΩ).
- The VDD pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Q5pin 1 | Connected to: Signal 71% · not connected 29% |
|
| Q1pin 2 | Connected to: Signal 71% · not connected 29% |
|
| Q0pin 3 | Connected to: CD4046 29% |
|
| Q2pin 4 | Connected to: Signal 57% · not connected 43% |
|
| Q6pin 5 | Connected to: Signal 71% · not connected 29% |
|
| Q7pin 6 | Connected to: Signal 57% · not connected 43% |
|
| Q3pin 7 | Connected to: Signal 71% · not connected 29% |
|
| VSSpin 8 | Connected to: GND 100% | — |
| Q4pin 10 | Connected to: Signal 71% · not connected 29% |
|
| COUTpin 12 | Connected to: Not connected 71% · a signal 29% | — |
| CKENpin 13 | Connected to: GND 100% | — |
| VDDpin 16 | Connected to: 9V 100% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pipes main by shannon-greenlight, Twangilizer by shannon-greenlight, 07 seq10 by bmurauer and Santas sequencer by guilhermegch.
The CD4017 in open source designs
The gallery holds 8 open source boards using the CD4017 from 8 GitHub repositories; a typical one measures about 94.8 × 100 mm and carries around 65 components.
71% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Pipes main by shannon-greenlight.
Parts used alongside the CD4017
What boards using the CD4017 are built for
CD4017: common questions
Where can I find a CD4017 reference design?
Each of the 8 boards on this page is a real design using the CD4017. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CD4017 CKEN pin connected?
The CKEN pin is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the CD4017.
How is the CD4017 COUT pin connected?
The COUT pin is left unconnected on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the CD4017.
What resistor goes on the CD4017 Q1 pin?
The Q1 pin has a series resistor on 4 of 7 designs, most often 100 Ω (then 1 kΩ). Counted from the KiCad layouts of 7 open source designs using the CD4017.
What parts are used alongside the CD4017?
The NE555P, CD4046, LM317_SOT-223 and TL072CP appear in the most repositories here.
How big is a typical board using the CD4017?
The median is 94.8 × 100 mm, and 71% are two-layer designs.
What is the most popular open source board using the CD4017?
By GitHub stars, Pipes main by shannon-greenlight, with 2 stars.
Can I simulate one of these boards using the CD4017 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.