Little Voicemail

guinius·Little_Voicemail·hardware/little-voicemail.kicad_sch

This repository ships a schematic but no board layout.

About the Little Voicemail PCB

Little Voicemail is an open source PCB design by guinius, published on GitHub under the GPL-3.0 license. It is a board, with 17 components from 11 distinct parts.

Other key parts include the MCP23017. By type, the board carries 8 connectors, 7 resistors, 1 IC and 1 capacitor.

From the project

little-voicemail.kicadsch is the schematic for the board that sits between the Raspberry Pi and the seven front-panel buttons. Open little-voicemail.kicadpro in KiCad 7 or newer.

little-voicemail.kicadsch is the schematic for the board that sits between the Raspberry Pi and the seven front-panel buttons. Open little-voicemail.kicadpro in KiCad 7 or newer.

It does one job: put six contact buttons and the push-to-talk button — switch and lamp for each — onto a single MCP23017 at address 0x20, so the whole panel costs the Pi nothing but the I²C bus it was already using for the audio codec. See HARDWARE.md for why it is built this way.

Main components on the Little Voicemail

Little Voicemail bill of materials (BOM)

17 components, 11 distinct parts.

QtyPartRefs
1
MCP23017
U1
1
RPi 40-pin (stacking)
J1
1
Contact 1
J2
1
Contact 2
J3
1
Contact 3
J4
1
Contact 4
J5
1
Contact 5
J6
1
Contact 6
J7
1
Push to talk
J8
1
100n
C1
7
220
R1, R2, R3, R4, R5, R6, R7

Little Voicemail design files

The KiCad project lives in the guinius/Little_Voicemail repository on GitHub; these links point at the commit this page was built from.

Little Voicemail: common questions

How many components are on the Little Voicemail?

17 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Little Voicemail design files?

From the guinius/Little_Voicemail repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Little Voicemail design in my own project?

Yes, under the terms of its GPL-3.0 license, which guinius chose for the repository.