HardLabs

Dock no nda

gunnchOS3k·gunnchos-hardware-industrial-design·hardware_v1/dock/kicad_no_nda/dock_no_nda.kicad_pcb

Dock no nda PCB layout, top view — open source STM32 board by gunnchOS3k

About the Dock no nda PCB

Dock no nda is an open source STM32 PCB design by gunnchOS3k, published on GitHub under the MIT license. It is a 4-layer board measuring 150 × 100 mm, with 5 components from 5 distinct parts.

Its main chip is the STM32G0_class, from the STM32 family.

From the project

gunnchOS3k MLV — 7GC Research + Product Incubator

Generated: 2026-09-18T16:24:23Z Campaign: HARDWARE10MASTERCAMPAIGN Claim boundary: digital architecture / EVT preparation only — not physical pass, not certification, not fab release.

Generated: 2026-09-18T16:48:39Z Campaign: HARDWARE10CCUSTOMFIRSTMAINLINEPIVOT Claim boundary: digital architecture / EVT preparation only — not physical pass, not certification, not fab release, not purchased.

Dock no nda bill of materials (BOM)

5 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBC
JUSB1
1
STM32G0_class
EC
UEC1
1
RTL8153_class
ETH
UETH1
1
VL817_class
HUB
UHUB1
1
TPS65994A_class
PD
UPD1

Dock no nda design files

The KiCad project lives in the gunnchOS3k/gunnchos-hardware-industrial-design repository on GitHub; these links point at the commit this page was built from.

Dock no nda: common questions

What microcontroller does the Dock no nda use?

The Dock no nda is built around the STM32G0_class, from the STM32 family.

How big is the Dock no nda PCB?

The Dock no nda measures 150 × 100 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Dock no nda?

5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dock no nda design files?

From the gunnchOS3k/gunnchos-hardware-industrial-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dock no nda design in my own project?

Yes, under the terms of its MIT license, which gunnchOS3k chose for the repository.

Can I test firmware for the Dock no nda without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in gunnchos-hardware-industrial-design

Similar boards