Handheld hybrid carrier
gunnchOS3k·gunnchos-hardware-industrial-design·device_designs/handheld_hybrid/kicad/handheld_hybrid.kicad_pcb
About the Handheld hybrid carrier PCB
Handheld hybrid carrier is an open source STM32 PCB design by gunnchOS3k, published on GitHub under the MIT license. It is a 4-layer board measuring 240 × 130 mm, with 26 components from 26 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the TPS62864. By type, the board carries 2 capacitors, 2 resistors, 1 IC and 1 diode.
From the project
gunnchOS3k MLV — 7GC Research + Product Incubator
Updated: 2026-08-08T19:40:00Z Exact SoM: Radxa NX5 RM121-D8E32 (RK3588S, 8GB+32GB eMMC) ADR: ADR-FP-002 + ADR-HW-001 PHYSICALEXECUTIONFREEZE ACTIVE — no fab, no purchase, draft digital only
Sustained game load: docs/sustainedgameload.md. SoM ICD: docs/somcarriericd.md.
Main components on the Handheld hybrid carrier
Handheld hybrid carrier bill of materials (BOM)
26 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS62864 | QFN-16-1EP_3x3mm_P0.5mm | U3V3 |
| 1 | PESD5V0S1UL | DFN1006-2 | DESD1 |
| 1 | AUDIO_CONN AUDIO | DFN1006-2 | JAUD1 |
| 1 | BATTERY_CONN BATTERY | DFN1006-2 | JBAT1 |
| 1 | CAMERA_CONN CAMERA | FFC_40P_0.5mm | JCAM1 |
| 1 | DEBUG_CONN DEBUG | DFN1006-2 | JDBG1 |
| 1 | DISPLAY_MIPI_CONN DISPLAY_MIPI | FFC_40P_0.5mm | JDISP1 |
| 1 | EC_FAN_CONN EC_FAN | DFN1006-2 | JFAN1 |
| 1 | GNSS_CONN GNSS | DFN1006-2 | JGNSS1 |
| 1 | HAPTICS_CONN HAPTICS | DFN1006-2 | JHAP1 |
| 1 | KEYBOARD_CONN KEYBOARD | DFN1006-2 | JKEY1 |
| 1 | SECURITY_CONN SECURITY | DFN1006-2 | JSEC1 |
| 1 | SODIMM-260 | SODIMM-260_DDR4_Socket | JSOM1 |
| 1 | TOUCH_CONN TOUCH | DFN1006-2 | JTP1 |
| 1 | TRACKPAD_CONN TRACKPAD | DFN1006-2 | JTRK1 |
| 1 | HRO TYPE-C-31-M-12 TYPE-C-31-M-12 | USB_C_Receptacle_Production | JUSB1 |
| 1 | WIFI_CONN WIFI | DFN1006-2 | JWIFI1 |
| 1 | WWAN_CONN WWAN | DFN1006-2 | JWWAN1 |
| 1 | BQ25895RTWR | WQFN-24-1EP_4x4mm_P0.5mm | UCHG1 |
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | UHID1 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS65987DDHRSHR | VQFN-56-1EP_7x7mm_P0.4mm | UPD1 |
| 1 | APTD1608LCGCK | LED_0603 | D1 |
| 1 | CL05A104KA5NNNC | C_0402 | C1 |
| 1 | GRM188R60J106ME47D | C_0402 | C2 |
| 1 | RC0402FR-0710KL | R_0402 | R1 |
| 1 | RC0402FR-071K0L | R_0402 | R2 |
Handheld hybrid carrier design files
The KiCad project lives in the gunnchOS3k/gunnchos-hardware-industrial-design repository on GitHub; these links point at the commit this page was built from.
Handheld hybrid carrier: common questions
What microcontroller does the Handheld hybrid carrier use?
The Handheld hybrid carrier is built around the STM32F103C8T6, from the STM32 family.
How big is the Handheld hybrid carrier PCB?
The Handheld hybrid carrier measures 240 × 130 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Handheld hybrid carrier?
26 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Handheld hybrid carrier design files?
From the gunnchOS3k/gunnchos-hardware-industrial-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Handheld hybrid carrier design in my own project?
Yes, under the terms of its MIT license, which gunnchOS3k chose for the repository.
Can I test firmware for the Handheld hybrid carrier without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in gunnchos-hardware-industrial-design
Ds xl coder carrier
gunnchOS3k
320 × 220 mm27 parts4LMIT0Student 14 5 carrier
gunnchOS3k
300 × 200 mm26 parts4LMIT0Dock carrier
gunnchOS3k
200 × 140 mm15 parts4LMIT0Edge io ring evt0
gunnchOS3k
28 × 10 mm14 parts2LMIT0Nordic nRF
Edge io ring
gunnchOS3k
19 × 19 mm8 parts2LMIT0Nordic nRF
Edge io ring fusion
gunnchOS3k
40 × 18 mm6 parts4LMIT0STM32
Dock no nda
gunnchOS3k
150 × 100 mm5 parts4LMIT0Nordic nRF
Rings nrf54l15
gunnchOS3k
40 × 30 mm3 parts4LMIT0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k