Makineat cart
gustavostuff·makineat·tools/kicad/cart-pcb/makineat-cart.kicad_pcb
About the Makineat cart PCB
Makineat cart is an open source PCB design by gustavostuff, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 44 × 37 mm, with 5 components from 3 distinct parts.
Other key parts include the AVR128DB28. By type, the board carries 3 capacitors, 1 IC and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
A portable Arcade tabletop with a 16x16 LED screen
MakiNeat is a cartridge-based portable tabletop arcade. The name comes from maquinita, a Mexican word for arcade machines (pronounced very similarly). The display is four 8x8 LED matrices in a 16x16 field. Graphics are 1-bit (LEDs are either ON or OFF).
On a similar spirit as the Magnavox Odyssey and the Vectrex, MakiNeat uses colored, translucent sheets to cover the screen. So the overlay is an extension of the cartridge, part of the game experience. Read overlays and design for details.

Main components on the Makineat cart
Makineat cart bill of materials (BOM)
5 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AVR128DB28 | DIP-28_W7.62mm | U1 |
| 1 | Cart edge 2x10 | Cart_Edge_2x10_P2.54mm | J1 |
| 3 | 100 nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3 |
Makineat cart design files
The KiCad project lives in the gustavostuff/makineat repository on GitHub; these links point at the commit this page was built from.
Makineat cart: common questions
How big is the Makineat cart PCB?
The Makineat cart measures 44 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Makineat cart?
5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Makineat cart design files?
From the gustavostuff/makineat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Makineat cart design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which gustavostuff chose for the repository.
More boards in makineat
Makineat v 05
gustavostuff
100 × 100 mm51 parts2LCERN-OHL-S-2.00Makineat v 04
gustavostuff
100 × 100 mm50 parts2LCERN-OHL-S-2.00Makineat v 03
gustavostuff
100 × 100 mm50 parts2LCERN-OHL-S-2.00Makineat v 02
gustavostuff
100 × 100 mm41 parts2LCERN-OHL-S-2.00Makineat
gustavostuff
100 × 160 mm41 parts2LCERN-OHL-S-2.00
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k