Booster op amp
h4·booster-op-amp
About the Booster op amp PCB
Booster op amp is an open source PCB design by h4, published on GitHub. It is a 2-layer board measuring 51 × 29 mm, with 16 components from 14 distinct parts.
Other key parts include the TL072. By type, the board carries 9 resistors, 5 capacitors and 1 IC.
From the project
OP-Amp guitar booster. Circuit based on Deep Blue Delay bufer stage but adopted to using more common electronic parts.
OP-Amp guitar booster. Circuit based on Deep Blue Delay bufer stage but adopted to using more common electronic parts.
This project is created using KiCAD v5.1.5. Gerber files are located in fab directory. Custom footprints may be found in booster-op-amp.pretty directory.

Main components on the Booster op amp
Booster op amp bill of materials (BOM)
16 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | 50KB | Potentiometer_Alpha_RV16AF_Single_Vertical_PCB_Mount | RV1 |
| 1 | 47U 47u | CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 22N 22n | C_Rect_L7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 47P 47p | C_Disc_D4.3mm_W1.9mm_P5.00mm | C3 |
| 1 | 100P 100p | C_Disc_D4.3mm_W1.9mm_P5.00mm | C4 |
| 1 | 1u | CP_Radial_D5.0mm_P2.50mm | C5 |
| 3 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R7 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 200K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 300K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 20K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
Booster op amp design files
The KiCad project lives in the h4/booster-op-amp repository on GitHub; these links point at the commit this page was built from.
- Layoutbooster-op-amp.kicad_pcb
- BOMdocs/bom.csv
Booster op amp: common questions
How big is the Booster op amp PCB?
The Booster op amp measures 51 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Booster op amp?
16 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Booster op amp design files?
From the h4/booster-op-amp repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Booster op amp design in my own project?
The repository has no license, so all rights stay with h4. Use it as a reference, and ask the author before reusing the design.