493 open source boards using the TL072
Real designs built with the TL072, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kivu12
ohmtech-rdi
59.6 × 109.5 mm135 parts2LCC-BY-SA-4.0405STM32
Plinkyblack hwmidi jacks
plinkysynth
121.9 × 109.2 mm261 parts4LMIT221Vco core
shmoergh
58 × 110 mm116 parts2LNo license219VCO
nickajeglin
37 × 113.9 mm104 parts2LNo license208AVR/Arduino
Super Sixteen v1
matthewcieplak
111.3 × 106.4 mm141 parts2LNo license171MFOS Eight Stage Phase Shifter - Main
mzuelch
27.9 × 101.6 mm104 parts2LMIT166Core
shmoergh
215 × 100 mm285 parts2LNo license124AVR/Arduino
MegaMIDI
AidanHockey5
100 × 100 mm102 parts2LAGPL-3.0116Output
QuinnFreedman
38 × 100 mm124 parts2LNo license114AVR/Arduino
Genny
superjoebob
100 × 100 mm102 parts2LNo license92Polykit X1 Monosynth
polykit
200 × 100 mm147 parts2LNo license89RP2040/RP2350
AS3397 proto DIP
PhysicsDptAngers
167.6 × 97.5 mm138 parts2LMIT87RP2040/RP2350
4HPico
rheslip
20.3 × 110 mm71 parts2LNo license83Crossover
maqifrnswa
185.4 × 105.4 mm120 parts2LGPL-3.073Zoxnoxious Z5524 (SSI2130/AS3394)
brer-rabbit
80 × 80 mm222 parts4LGPL-3.068DonCon2040
ravinrabbid
130.8 × 58.4 mm99 parts2LMIT64RP2040/RP2350
Useq1
Emute-Lab-Instruments
40.6 × 108 mm163 parts2LNo license44Digishaper152
jonnor
80 × 60 mm60 parts2LNo license43OpenEuroBoard
sensai7
300 × 100 mm135 parts2LGPL-3.041Quad Tube VCA
ob1techno
162.6 × 100.3 mm228 parts2LNo license37RP2040/RP2350
MMM main
niektb
40 × 110 mm145 parts4LCC-BY-SA-4.034Drum H v2
Pl0p
100 × 100 mm96 parts2LNo license33Noise
spielhuus
80.9 × 111.8 mm96 parts2LNo license32258D
DunningtonAudio
104 × 158 mm219 parts2LGPL-3.031Amp
rabidaudio
59 × 110 mm111 parts2LMIT31BSPD
SDU-Vikings
100 × 50 mm84 parts2LCC0-1.030AVR/Arduino
Vwcdpic with BT
tomaskovacik
68.1 × 49.8 mm102 parts2LGPL-2.029- schematic only · 56 partsAVR/Arduino
GranulArduino
benjiaomodular
56 partsMIT29 AVR/Arduino
Diymetro
tomarus
162.8 × 100 mm115 parts2LNo license27NXP
RawWaves
SherpaModular
20 × 107 mm55 parts2LNo license26MiniDJ Back
Thorinair
29.5 × 108.6 mm182 parts2LCC-BY-SA-4.025281D
DunningtonAudio
104 × 158 mm370 parts4LGPL-3.024AVR/Arduino
No fi delay
Krakenpine
99.5 × 199.5 mm80 parts2LNo license22NXP
Fjol
hallmar
184.7 × 110.7 mm204 parts2LNo license21STM32
DisPhaze Components
dchwebb
60 × 110 mm89 parts2LApache-2.021STM32
Plinkyblack hwmidi jacks
ember-labs-io
121.9 × 109.2 mm261 parts4LCC-BY-SA-4.019
How designs wire the TL072
Read from the KiCad layouts of 258 open source designs, one per repository: what each pin of the TL072 connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 222 of 258 designs, most often 100 kΩ (then 10 kΩ).
- The OUT pins have a series resistor on 221 of 258 designs, most often 10 kΩ (then 1 kΩ).
- The V+ pin has a decoupling capacitor on 135 of 257 designs, most often 100 nF (then 2.2 µF).
- The OUT pins have a series capacitor on 133 of 258 designs, most often 100 pF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1, 7 | Connected to: Signal 90% |
|
| -pin 2, 6 | Connected to: Signal 90% |
|
| +pin 3, 5 | Connected to: Signal 60% · GND 33% |
|
| V-pin 4 | Connected to: -12V 63% · GND 25% |
|
| V+pin 8 | Connected to: 12V 87% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Audio in daisy by ohmtech-rdi, Plinkyblack hwmidi jacks by plinkysynth, Brain core by shmoergh and Util LFO by nickajeglin.
The TL072 in open source designs
The gallery holds 493 open source boards using the TL072 from 279 GitHub repositories; a typical one measures about 68.5 × 100 mm and carries around 72 components.
88% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.
The most starred is Kivu12 by ohmtech-rdi.
Parts used alongside the TL072
Microcontrollers on boards using the TL072
What boards using the TL072 are built for
TL072: common questions
Where can I find a TL072 reference design?
Each of the 493 boards on this page is a real design using the TL072. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TL072 - pin?
The - pins have a series resistor on 222 of 258 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 258 open source designs using the TL072.
What resistor goes on the TL072 OUT pin?
The OUT pins have a series resistor on 221 of 258 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 258 open source designs using the TL072.
What decoupling capacitors do designs use on the TL072 V+ pin?
The V+ pin has a decoupling capacitor on 135 of 257 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 258 open source designs using the TL072.
What parts are used alongside the TL072?
The TL074, LM13700, NE5532, MCP6004 and LM358 appear in the most repositories here.
Which microcontrollers do boards using the TL072 use?
Most are built on STM32 (32), AVR/Arduino (28), RP2040/RP2350 (15) and NXP (13).
How big is a typical board using the TL072?
The median is 68.5 × 100 mm, and 88% are two-layer designs.
What is the most popular open source board using the TL072?
By GitHub stars, Kivu12 by ohmtech-rdi, with 405 stars.
Can I simulate one of these boards using the TL072 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.