Loadcell weighing platform

habipcandurmus07-bit·loadcell-weighing-platform

Loadcell weighing platform PCB layout, top view — open source board by habipcandurmus07-bit

About the Loadcell weighing platform PCB

Loadcell weighing platform is an open source PCB design by habipcandurmus07-bit, published on GitHub under the MIT license. It is a 2-layer board measuring 95 × 121.5 mm, with 13 components from 4 distinct parts.

By type, the board carries 5 connectors and 4 resistors.

It belongs with the test & measurement designs in this gallery.

From the project

4x 1kg load cell weighing platform with Baykon TX11 transmitter and custom KiCad junction board

A four-point weighing platform built from scratch: mechanical frame, load cell integration, a custom-designed summing junction board (KiCad), and transmitter calibration.

The system measures weight using four load cells mounted at the corners of an aluminium plate. The cells are wired in parallel through a custom junction board, which sums their outputs into a single differential signal. This signal is read by a Baykon TX11 analog weight transmitter, which provides the digital readout and process output.

Loadcell weighing platform, from the project README
From the project README

Loadcell weighing platform bill of materials (BOM)

13 components, 4 distinct parts.

QtyPartRefs
4
Conn_01x04
J1, J2, J3, J4
1
Conn_01x05
J5
4
10
RV1, RV2, RV3, RV4
4
2.2
R1, R2, R3, R4

Loadcell weighing platform design files

The KiCad project lives in the habipcandurmus07-bit/loadcell-weighing-platform repository on GitHub; these links point at the commit this page was built from.

Loadcell weighing platform: common questions

How big is the Loadcell weighing platform PCB?

The Loadcell weighing platform measures 95 × 121.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Loadcell weighing platform?

13 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Loadcell weighing platform design files?

From the habipcandurmus07-bit/loadcell-weighing-platform repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Loadcell weighing platform design in my own project?

Yes, under the terms of its MIT license, which habipcandurmus07-bit chose for the repository.

Similar boards