Badge hardware
hackwinkel·badge-hardware·KiCAD_PCB/badge.kicad_pcb
About the Badge hardware PCB
Badge hardware is an open source PCB design by hackwinkel, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 75 components from 19 distinct parts.
Other key parts include the switch, LM1117-3.3, digijoy, wrover and 2jumpers. By type, the board carries 42 diodes, 16 resistors, 9 ICs, 5 capacitors, 1 transistor and 1 connector.
It belongs with the wearables designs in this gallery.
From the project
Hardware design files for the hackwinkel badge.
Main components on the Badge hardware
Badge hardware bill of materials (BOM)
75 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | switch | switch | U1 |
| 1 | LM1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 2 | switch | button | U3, U5 |
| 1 | digijoy | digijoy | U4 |
| 1 | wrover | wrover | U6 |
| 1 | 2jumpers | 2jumpers | U7 |
| 1 | 3jumpers | 3jumpers | U8 |
| 1 | tft | tft | U9 |
| 1 | BC847 | SOT-23 | Q3 |
| 1 | ftdi | dcon | j1 |
| 1 | li-ion | powconn | B1 |
| 21 | nled | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D3, D4, D7, D8, D9, D13, D14 +13 |
| 21 | mled | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D5, D6, D10, D11, D12, D17, D18 +13 |
| 1 | 10u | C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C1 |
| 2 | 100n | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2, C4 |
| 1 | 10u | LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C3 |
| 1 | 1u | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C5 |
| 8 | 10k | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R16 |
| 8 | 22 | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R9, R10, R11, R12, R13, R14, R15, R17 |
Badge hardware design files
The KiCad project lives in the hackwinkel/badge-hardware repository on GitHub; these links point at the commit this page was built from.
Badge hardware: common questions
How big is the Badge hardware PCB?
The Badge hardware measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Badge hardware?
75 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Badge hardware design files?
From the hackwinkel/badge-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Badge hardware design in my own project?
Yes, under the terms of its MIT license, which hackwinkel chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k