Exhaustcontrol
About the Exhaustcontrol PCB
Exhaustcontrol is an open source PCB design by Hal9k-dk, published on GitHub. It is a 2-layer board measuring 64.5 × 38.6 mm, with 13 components from 12 distinct parts.
Other key parts include the 74HC08. By type, the board carries 5 resistors, 2 connectors, 2 capacitors, 1 IC, 1 transistor and 1 relay.
From the project
Everything related to the Lasersaur
Main components on the Exhaustcontrol
Exhaustcontrol bill of materials (BOM)
13 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC08 | DIP-14_W7.62mm_LongPads | U1 |
| 1 | BC547 | TO-92_Wide | Q1 |
| 1 | JST XH | JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | Conn_01x02 | JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | UMS05-1A80-75D | DIL-relay | K1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 100n | C_Axial_L5.1mm_D3.1mm_P10.00mm_Horizontal | C1 |
| 1 | 220u | CP_Radial_D10.0mm_P2.50mm_P5.00mm | C2 |
| 1 | 4k7 | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1 |
| 1 | 100 | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R2 |
| 1 | 1M | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R3 |
| 2 | 1k | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R4, R5 |
Exhaustcontrol design files
The KiCad project lives in the Hal9k-dk/lasersaur repository on GitHub; these links point at the commit this page was built from.
Exhaustcontrol: common questions
How big is the Exhaustcontrol PCB?
The Exhaustcontrol measures 64.5 × 38.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Exhaustcontrol?
13 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Exhaustcontrol design files?
From the Hal9k-dk/lasersaur repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Exhaustcontrol design in my own project?
The repository has no license, so all rights stay with Hal9k-dk. Use it as a reference, and ask the author before reusing the design.
