91 open source boards using the 74HC08
Real designs built with the 74HC08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Minimal-64x4-Home-Computer
slu4coder
245.1 × 160 mm134 parts2LNo license3238-Bit CPU 32k
slu4coder
196.9 × 125.1 mm101 parts2LNo license184Minimal-64-Home-Computer
slu4coder
306.1 × 130.2 mm127 parts2LNo license93RP2040/RP2350
SB-mini-II
simonboak
184.2 × 169.5 mm91 parts4LMIT74K30 SBC
transistorfet
160 × 100 mm87 parts4LGPL-3.069Ethernet to SPI adapter, Nucleo-64 shield
imihajlow
69 × 74 mm48 parts4LGPL-3.069ESP8266
Tesla-Front-Drive-Unit
damienmaguire
190.5 × 176.6 mm196 parts4LNo license5924h Digital Clock
erikvanzijst
152.9 × 74.9 mm82 parts2LNo license21ESP8266
Stargate
leomanes
335 × 218.6 mm274 parts2LGPL-3.018Peak-And hold-Driver
Tjeerdie
100.1 × 50 mm112 parts2LGPL-3.01874HCT6526 Board 3
dmolinagarcia
100 × 100 mm89 parts4LNo license14EX-MotorShield8874
DCC-EX
65.9 × 52.9 mm75 parts4LCERN-OHL-W-2.012Z280
transistorfet
100 × 115 mm55 parts4LGPL-3.011AVR/Arduino
Z80Atmega128
46nori
170 × 130 mm105 parts4LGPL-3.09Claculator Keypad
Robert-Mones
210 × 119 mm195 parts6LNo license5Motor shield
semify-eda
65.9 × 52.9 mm80 parts4LNo license54004MainBoard
novi
95.1 × 72.1 mm109 parts2LCC-BY-4.04Latest-Full-Backplane
Trilobyte-CPU
100 × 100 mm146 parts4LNo license2SF68
scefrom
271.8 × 147.3 mm122 parts4LCustom license2FellaPC
agkaminski
284.9 × 96.5 mm107 parts2LCC0-1.02Compe 6502 Mainboard
rjhelms
167.6 × 134.6 mm93 parts2LNo license2Enter Title On Page Setting Dialog
PickledDog
102.6 × 66 mm42 parts2LApache-2.02Cisc-8
nailed-barnacle
299.7 × 198.1 mm315 parts2LMIT1Retro clock tmct
tmct-web
245 × 240 mm255 parts2LNo license1- schematic only · 112 parts
MSAP-1
mehrantsi
112 partsMIT1 STM32
SplitBoard8Voice
hsetlik
310 × 199 mm517 parts4LNo license0AVR/Arduino
Hauptplatine
JoshCrouch
220 × 160.5 mm504 parts4LNo license0Micro
jurendono
200 × 150 mm175 parts2LNo license0PIC
DCC-Booster
DavidMFlynn
102.9 × 99.1 mm118 parts2LGPL-3.00Patch board2022a
daisuke-ym
230 × 63 mm115 parts2LNo license0Minimal-UART-Computer
slowcorners
191.8 × 121.3 mm109 parts2LNo license0Digital clock
guilhermegch
100 × 100 mm96 parts2LNo license0Minimal-UART-CPU-Dev
slowcorners
180.3 × 112.4 mm89 parts2LNo license0Minimal-UART-CPU-FLASH-Edition
tlhconsulting
177.2 × 114.3 mm81 parts2LNo license0Drsstc
domergan
64.8 × 76.2 mm69 parts2LNo license0Motherboard
ostertag
137.2 × 261 mm68 parts2LGPL-2.00
How designs wire the 74HC08
Read from the KiCad layouts of 61 open source designs, one per repository: what each pin of the 74HC08 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 42 of 61 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 95% | — |
| VCCpin 14 | Connected to: 5V 93% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minimal-64x4-Home-Computer by slu4coder, 8-Bit CPU 32k by slu4coder, 1002 EPROM EMU NG by Kris-Sekula and Minimal-64-Home-Computer by slu4coder.
The 74HC08 in open source designs
The gallery holds 91 open source boards using the 74HC08 from 64 GitHub repositories; a typical one measures about 100 × 88.9 mm and carries around 76 components.
70% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.
The most starred is Minimal-64x4-Home-Computer by slu4coder.
Parts used alongside the 74HC08
Microcontrollers on boards using the 74HC08
What boards using the 74HC08 are built for
74HC08: common questions
Where can I find a 74HC08 reference design?
Each of the 91 boards on this page is a real design using the 74HC08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC08 VCC pin?
The VCC pin has a decoupling capacitor on 42 of 61 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 61 open source designs using the 74HC08.
What parts are used alongside the 74HC08?
The 74HC32, 74HC04, 74HC74, 74HC00 and 74HC86 appear in the most repositories here.
Which microcontrollers do boards using the 74HC08 use?
Most are built on AVR/Arduino (10), ESP8266 (2), RP2040/RP2350 (1) and Renesas (1).
How big is a typical board using the 74HC08?
The median is 100 × 88.9 mm, and 70% are two-layer designs.
What is the most popular open source board using the 74HC08?
By GitHub stars, Minimal-64x4-Home-Computer by slu4coder, with 323 stars.
Can I simulate one of these boards using the 74HC08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.