Eclectronics project2
HALtheWise·eclectronics-project2·camboard/camboard.kicad_pcb
About the Eclectronics project2 PCB
Eclectronics project2 is an open source STM32 PCB design by HALtheWise, published on GitHub under the MIT license. It is a 2-layer board measuring 76.2 × 76.2 mm, with 60 components from 29 distinct parts.
Its main chip is the STM32F746VGT6, from the STM32 family. Other key parts include the MCP1703A-3302_SOT23 and FT230XS. By type, the board carries 22 resistors, 9 capacitors, 7 connectors, 5 switches, 5 diodes and 3 ICs.

Main components on the Eclectronics project2
Eclectronics project2 bill of materials (BOM)
60 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F746VGT6 | LQFP-100_14x14mm_Pitch0.5mm | U1 |
| 1 | MCP1703A-3302_SOT23 | SOT-23 | U2 |
| 1 | FT230XS | SSOP-16_3.9x4.9mm_Pitch0.635mm | U3 |
| 1 | SG-310SCN | Crystal_SMD_3225-4pin_3.2x2.5mm | Y1 |
| 1 | NX3215SA | Crystal_SMD_3215-2pin_3.2x1.5mm | Y2 |
| 1 | USB_microB_2040002-1 | USB_microB_2040002-1_alt | J1 |
| 1 | Micro_SD_Card | 114-00841-68 | J2 |
| 1 | PPTC102LFBN-RC | Socket_Strip_Straight_2x10_Pitch2.54mm | J3 |
| 1 | Conn_ARM_JTAG_SWD_20 | Socket_Strip_Straight_2x10_Pitch2.54mm | J4 |
| 1 | GS2 | GS2 | J5 |
| 2 | Conn_01x25_Female | Socket_Strip_Straight_1x25_Pitch2.54mm | J6, J7 |
| 1 | 1uF | C_0603 | Ca2 |
| 6 | 100nF | C_0603 | Cp1, Cp2, Cp3, Cp4, Cp5, Cp6 |
| 3 | SW_DPDT_x2 | JS202011SCQN | SW1, SW4, SW5 |
| 2 | SW_Push | SW_SPST_B3U-1000P | SW2, SW3 |
| 3 | LED-G | LED_0805 | D1, D2, D3 |
| 1 | LED-B | LED_0805 | D4 |
| 1 | LED-R | LED_0805 | D5 |
| 1 | 10uF | C_0805 | C1 |
| 2 | 100nF | C_0603 | C4, C5 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7pF | C_0603 | C6, C7 |
| 2 | 2.2uF | C_0805 | C15, C16 |
| 2 | 1uF | C_0603 | C17, C18 |
| 2 | 30.1 | R_0603 | R1, R2 |
| 5 | 47.5K | R_0603 | R3, R4, R5, R6, R7 |
| 7 | 10K | R_0603 | R8, R9, R10, R11, R15, R21, R22 |
| 1 | 100 | R_0603 | R12 |
| 2 | 0 | R_0603 | R13, R14 |
| 5 | 499 | R_0603 | R16, R17, R18, R19, R20 |
Eclectronics project2 design files
The KiCad project lives in the HALtheWise/eclectronics-project2 repository on GitHub; these links point at the commit this page was built from.
Eclectronics project2: common questions
What microcontroller does the Eclectronics project2 use?
The Eclectronics project2 is built around the STM32F746VGT6, from the STM32 family.
How big is the Eclectronics project2 PCB?
The Eclectronics project2 measures 76.2 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eclectronics project2?
60 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Eclectronics project2 design files?
From the HALtheWise/eclectronics-project2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Eclectronics project2 design in my own project?
Yes, under the terms of its MIT license, which HALtheWise chose for the repository.
Can I test firmware for the Eclectronics project2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k