PCB-Projects
hananabilabd·PCB-Projects·STM32F4Stamp-PCBLibrary/F405Pill.kicad_pcb
About the PCB-Projects
PCB-Projects is an open source STM32 PCB design by hananabilabd, published on GitHub. It is a board measuring 74.9 × 25.4 mm, with 112 components from 71 distinct parts.
Its main chip is the STM32F405RGT, from the STM32 family. Other key parts include the VREG-3V3. By type, the board carries 55 jumpers, 13 capacitors, 6 resistors, 2 ICs, 2 switches and 1 crystal.
From the project
PCB Projects by me using Eagle
Main components on the PCB-Projects
PCB-Projects bill of materials (BOM)
112 components, 71 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VREG-3V3 | SOT23-5 | IC1 |
| 1 | STM32F405RGT | LQFP64 | U1 |
| 1 | 8MHz | CRYSTAL-SMD-5X3 | Y1 |
| 2 | ~ | 1X02_2MM_TH | JMP-HOLDER57, JMP-USB57 |
| 1 | ~ | SJ_2S | JMP-UID57 |
| 1 | 5V | 1X1-HEADER-HOLE | JP2 |
| 4 | GND | 1X1-HEADER-HOLE | JP3, JP5, JP6, JP7 |
| 1 | 3V3 | 1X1-HEADER-HOLE | JP4 |
| 1 | PB8 | 1X1-HEADER-HOLE | JP8 |
| 1 | PA10 | 1X1-HEADER-HOLE | JP9 |
| 1 | PA8 | 1X1-HEADER-HOLE | JP10 |
| 1 | PA13 | 1X1-HEADER-HOLE | JP11 |
| 1 | PC9 | 1X1-HEADER-HOLE | JP12 |
| 1 | PC15 | 1X1-HEADER-HOLE | JP13 |
| 1 | PC14 | 1X1-HEADER-HOLE | JP14 |
| 1 | PC13 | 1X1-HEADER-HOLE | JP15 |
| 1 | PC12 | 1X1-HEADER-HOLE | JP16 |
| 1 | PC11 | 1X1-HEADER-HOLE | JP17 |
| 1 | PC10 | 1X1-HEADER-HOLE | JP18 |
| 1 | PC8 | 1X1-HEADER-HOLE | JP19 |
Show 51 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PC7 | 1X1-HEADER-HOLE | JP20 |
| 1 | PC6 | 1X1-HEADER-HOLE | JP21 |
| 1 | PC5 | 1X1-HEADER-HOLE | JP22 |
| 1 | PC4 | 1X1-HEADER-HOLE | JP23 |
| 1 | PC3 | 1X1-HEADER-HOLE | JP24 |
| 1 | PC2 | 1X1-HEADER-HOLE | JP25 |
| 1 | PC1 | 1X1-HEADER-HOLE | JP26 |
| 1 | PC0 | 1X1-HEADER-HOLE | JP27 |
| 1 | PD2 | 1X1-HEADER-HOLE | JP28 |
| 1 | PA0 | 1X1-HEADER-HOLE | JP29 |
| 1 | PA1 | 1X1-HEADER-HOLE | JP30 |
| 1 | PA2 | 1X1-HEADER-HOLE | JP31 |
| 1 | PA3 | 1X1-HEADER-HOLE | JP32 |
| 1 | PA4 | 1X1-HEADER-HOLE | JP33 |
| 1 | PA5 | 1X1-HEADER-HOLE | JP34 |
| 1 | PA6 | 1X1-HEADER-HOLE | JP35 |
| 1 | PA7 | 1X1-HEADER-HOLE | JP36 |
| 1 | PA14 | 1X1-HEADER-HOLE | JP37 |
| 1 | PA15 | 1X1-HEADER-HOLE | JP38 |
| 1 | PB0 | 1X1-HEADER-HOLE | JP39 |
| 1 | PB1 | 1X1-HEADER-HOLE | JP40 |
| 1 | PB3 | 1X1-HEADER-HOLE | JP41 |
| 1 | PB4 | 1X1-HEADER-HOLE | JP42 |
| 1 | PB5 | 1X1-HEADER-HOLE | JP43 |
| 1 | PB6 | 1X1-HEADER-HOLE | JP44 |
| 1 | PB7 | 1X1-HEADER-HOLE | JP45 |
| 1 | PB9 | 1X1-HEADER-HOLE | JP46 |
| 1 | PB10 | 1X1-HEADER-HOLE | JP47 |
| 1 | PB11 | 1X1-HEADER-HOLE | JP48 |
| 1 | PB12 | 1X1-HEADER-HOLE | JP49 |
| 1 | PB13 | 1X1-HEADER-HOLE | JP50 |
| 1 | PB14 | 1X1-HEADER-HOLE | JP51 |
| 1 | PB15 | 1X1-HEADER-HOLE | JP52 |
| 1 | VBAT | 1X1-HEADER-HOLE | JP53 |
| 1 | !RST | 1X1-HEADER-HOLE | JP54 |
| 1 | BOOT0 | 1X1-HEADER-HOLE | JP55 |
| 1 | USB-ID | 1X1-HEADER-HOLE | JP56 |
| 1 | !RST | SWITCH-TACT-B3U-1100P-B | SW1 |
| 1 | BOOT | SWITCH-TACT-B3U-1100P-B | SW2 |
| 1 | USB-MICROB-SMD | USB-MICROB-SMD | USB57 |
| 28 | VPDEV0 | VPAC0 | VP_0, VP_1, VP_2, VP_3, VP_4, VP_5, VP_6, VP_7 +20 |
| 1 | ~ | LED-0603 | LED1 |
| 3 | 4u7 | EIA3216-KIT | C1, C9, C10 |
| 5 | 100n | 0603-CAP | C2, C3, C4, C5, C6 |
| 2 | 2u2 | 0603-CAP | C7, C8 |
| 1 | 470p | 0603-CAP | C11 |
| 2 | 22p | 0603-CAP | C12, C13 |
| 2 | 22R | 0603-RES | R1, R2 |
| 1 | 470R | 0603-RES | R3 |
| 2 | 10K | 0603-RES | R4, R5 |
| 1 | 1.5k | 0603-RES | R6 |
PCB-Projects design files
The KiCad project lives in the hananabilabd/PCB-Projects repository on GitHub; these links point at the commit this page was built from.
PCB-Projects: common questions
What microcontroller does the PCB-Projects use?
The PCB-Projects is built around the STM32F405RGT, from the STM32 family.
How big is the PCB-Projects?
The PCB-Projects measures 74.9 × 25.4 mm and is 1.6 mm thick.
How many components are on the PCB-Projects?
112 components, from 71 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCB-Projects design files?
From the hananabilabd/PCB-Projects repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PCB-Projects design in my own project?
The repository has no license, so all rights stay with hananabilabd. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCB-Projects without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k