9 open source boards using the VREG_3V3
Real designs built with the VREG_3V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
1bitsy
1Bitsy
38.1 × 17.8 mm88 parts4LNo license66STM32
F405Pill
rogerclarkmelbourne
74.9 × 25.4 mm112 partsNo license51STM32
1bitsy
esden
38.1 × 17.8 mm88 parts4LNo license19STM32
PCB-Projects
hananabilabd
74.9 × 25.4 mm112 partsNo license1Rfid board pacbiz
NightowlPH
62.2 × 47.6 mm6 parts2LGPL-3.00STM32
1bitsy rr
1Bitsy
38.1 × 17.8 mm88 parts4LNo license66STM32
1bitsy rr
esden
38.1 × 17.8 mm88 parts4LNo license19Rfid board v2
NightowlPH
62.2 × 47.6 mm6 parts2LGPL-3.00Aircon board
NightowlPH
19.1 × 33 mm3 parts2LGPL-3.00
How designs wire the VREG_3V3
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the VREG_3V3 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 2 is tied to GND on 5 of 5 designs.
- Pin 3 is tied to VIN on 5 of 5 designs.
- Pin 1 has a decoupling capacitor on 4 of 5 designs, most often 4.7 µF.
- Pin 4 has a capacitor to GND on 4 of 5 designs, most often 470 pF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: VIN 80% · GND 20% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: VIN 100% |
|
| Pin 4 | Connected to: Signal 80% · 3.3V 20% |
|
| Pin 5 | Connected to: 3.3V 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 1bitsy by 1Bitsy, F405Pill by rogerclarkmelbourne, 1bitsy by esden and PCB-Projects by hananabilabd.
The VREG_3V3 in open source designs
The gallery holds 9 open source boards using the VREG_3V3 from 5 GitHub repositories; a typical one measures about 38.1 × 25.4 mm and carries around 88 components.
57% use four copper layers or more, and 33% carry an open source license.
The most starred is 1bitsy by 1Bitsy.
Parts used alongside the VREG_3V3
Microcontrollers on boards using the VREG_3V3
What boards using the VREG_3V3 are built for
VREG_3V3: common questions
Where can I find a VREG_3V3 reference design?
Each of the 9 boards on this page is a real design using the VREG_3V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the VREG_3V3 pin 2 connected?
Pin 2 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the VREG_3V3.
How is the VREG_3V3 pin 3 connected?
Pin 3 is tied to VIN on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the VREG_3V3.
What decoupling capacitors do designs use on the VREG_3V3 pin 1?
Pin 1 has a decoupling capacitor on 4 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the VREG_3V3.
Which microcontrollers do boards using the VREG_3V3 use?
Most are built on STM32 (6).
How big is a typical board using the VREG_3V3?
The median is 38.1 × 25.4 mm, and 43% are two-layer designs.
What is the most popular open source board using the VREG_3V3?
By GitHub stars, 1bitsy by 1Bitsy, with 66 stars.
Can I simulate one of these boards using the VREG_3V3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.