SwarmCast
hariraajan3·SwarmCast·hardware/SwarmCast.kicad_pcb
About the SwarmCast PCB
SwarmCast is an open source PCB design by hariraajan3, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 67 mm, with 51 components from 15 distinct parts.
Other key parts include the glyph-s3, DHT 11, gmod-micro_sd, gmod-rtc and gsense-microphone_1ch. By type, the board carries 20 resistors, 13 capacitors, 9 ICs, 4 transistors, 3 switches and 2 connectors.
It belongs with the displays & leds designs in this gallery.
Main components on the SwarmCast
SwarmCast bill of materials (BOM)
51 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | glyph-s3 | glyph-s3 | U1 |
| 1 | DHT 11 | DHT11 | U2 |
| 1 | gmod-micro_sd | gmod-micro_sd | U3 |
| 1 | gmod-rtc | gmod-rtc | U4 |
| 4 | gsense-microphone_1ch | gsense-microphone_1ch | U5, U6, U7, U8 |
| 1 | OLED 0.91 DISPLAY | OLED_0.91_display | U9 |
| 4 | BC547_npn | BC547_npn | Q1, Q2, Q3, Q4 |
| 1 | POWER-IN | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | LDR | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | SW_Push | SW_PUSH-12mm | SW1 |
| 2 | SW_Push | SW_PUSH_6mm_H5mm | SW2, SW3 |
| 13 | 0.1u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8 +5 |
| 14 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +6 |
| 5 | 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R15, R16, R20 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
SwarmCast design files
The KiCad project lives in the hariraajan3/SwarmCast repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/SwarmCast.kicad_pcb
- Schematichardware/SwarmCast.kicad_sch
SwarmCast: common questions
How big is the SwarmCast PCB?
The SwarmCast measures 80 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SwarmCast?
51 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the SwarmCast design files?
From the hariraajan3/SwarmCast repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SwarmCast design in my own project?
Yes, under the terms of its MIT license, which hariraajan3 chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k