Ally13
About the Ally13 PCB
Ally13 is an open source PCB design by hatanoh, published on GitHub. It is a 2-layer board measuring 261.3 × 79.9 mm, with 99 components from 17 distinct parts.
Other key parts include the BLE-Micro-Pro-2 and TPS61221. By type, the board carries 40 diodes, 38 switches, 2 ICs, 2 connectors, 2 capacitors and 1 battery holder.
It belongs with the keyboards designs in this gallery.
From the project
my various 30% keyboards
キーボードとしての基本的な動作には問題がないことは確認していますが、多少ネジ穴位置や組み立て難易度に難があります。
トッププレート裏にBMPを配置しているのでProMicroを重ねないタイプの普通のキーボードぐらいの厚さ(7mmスペーサー使用)になっています (Bootleg31除く/Bootleg31は11mm)
Main components on the Ally13
Ally13 bill of materials (BOM)
99 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BLE-Micro-Pro-2 | BLEMicroPro-2N | U1 |
| 1 | TPS61221 | SOT-363_SC-70-6_Handsoldering | U2 |
| 1 | Conn_01x16 | PinHeader_1x16_P1.27mm_Conthrough | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P1.27mm_Conthrough | J2 |
| 1 | Battery_Cell | BatteryHolder_Keystone_2466_1xAAA | BT1 |
| 6 | MountingHole | HOLE_M2_TH | H1, H2, H4, H5, H6, H10 |
| 6 | MountingHole | HOLE_M2 | H3, H7, H8, H9, H11, H12 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | JModulo1 |
| 30 | SW_Push | CPG1511_1u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +22 |
| 2 | SW_Push | CPG1511_1.75u | SW24, SW34 |
| 2 | SW_Push | CPG1511_1.25u | SW25, SW35 |
| 2 | TMHU27 | THMU27 | SW36, SW37 |
| 1 | SW_RST | TACT_SWITCH_TVBP06 | SW38 |
| 1 | SW_PWR | SLIDE_SWITCH_SK-12D01 | SW39 |
| 40 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +32 |
| 1 | 4.7uH | L_Taiyo-Yuden_NR-30xx_HandSoldering | L1 |
| 2 | 10uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
Ally13 design files
The KiCad project lives in the hatanoh/30p repository on GitHub; these links point at the commit this page was built from.
Ally13: common questions
How big is the Ally13 PCB?
The Ally13 measures 261.3 × 79.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ally13?
99 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ally13 design files?
From the hatanoh/30p repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ally13 design in my own project?
The repository has no license, so all rights stay with hatanoh. Use it as a reference, and ask the author before reusing the design.
More boards in 30p
Ally24
270.3 × 92.3 mm101 parts2LNo license4
N30aj
251.8 × 59.5 mm95 parts2LNo license4
Ally24
253.6 × 92.3 mm91 parts2LNo license4
Ally13
244.7 × 79.9 mm89 parts2LNo license4
N30aj
234 × 59.5 mm86 parts2LNo license4
N31
241.7 × 61.9 mm81 parts2LNo license4
Ally24 Top
270.3 × 92.3 mm58 parts2LNo license4
Ally13 Top
261.3 × 79.9 mm57 parts2LNo license4
N30ajTop
251.8 × 59.5 mm54 parts2LNo license4
N31 topplate
223.8 × 61.9 mm35 parts2LNo license4
Ally13 Btm
261.3 × 79.9 mm13 parts2LNo license4
Similar boards
Lily58 Lite Rev3 TOP Case
kata0510
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k