HardLabs

LPC810.Pong2

Hecatron-Cad·Hecatron.Kicad.General·KiCad/Projects/LPC810.Pong2/LPC810.Pong2/LPC810.Pong2.kicad_pcb

LPC810.Pong2 PCB layout, top view — open source NXP board by Hecatron-Cad

About the LPC810.Pong2 PCB

LPC810.Pong2 is an open source NXP PCB design by Hecatron-Cad, published on GitHub under the MIT license. It is a 2-layer board measuring 36.3 × 64 mm, with 25 components from 19 distinct parts.

Its main chip is the LPC810M021FN8, from the NXP family. By type, the board carries 8 resistors, 5 connectors, 5 capacitors, 3 switches, 2 diodes and 1 IC.

From the project

General Circuits for KiCad

This is a collection of docs for the creation of PCB's via KiCad, as well as some schematic templates for projects. Also I've put some details here on using a LaserCutter (Manchester Hackspace one) As well as a CNC (Shapeoko2 / Ooznest OX) for making prototype PCB boards

Step by Step using KiCad to create a PCB Using FlatCAM to create svg's for importing into Visicut Step by Step using Visicut / The Manchester Hackspace Orange Laser Cutter to create PCB's Using FlatCAM to create G-Code for importing into Chillipepr * Step by Step using Chillipepr to mill a PCB

Main components on the LPC810.Pong2

LPC810M021FN8

LPC810.Pong2 bill of materials (BOM)

25 components, 19 distinct parts.

QtyPartRefs
1
LPC810M021FN8
U1
1
Serial Prog
P1
1
Video Out
P2
1
Audio Out
P3
1
Paddle 1
P4
1
Paddle 2
P5
1
Battery
BT1
1
~Reset
SW1
1
Power
SW2
1
Program
SW3
1
BAS70JFILM
D1
1
Power LED
D2
1
2.2n
C1
4
100n
C2, C3, C4, C5
1
620R
R1
1
680R
R2
2
120R
R3, R8
2
10K
R4, R5
2
1K
R6, R7

LPC810.Pong2 design files

The KiCad project lives in the Hecatron-Cad/Hecatron.Kicad.General repository on GitHub; these links point at the commit this page was built from.

LPC810.Pong2: common questions

What microcontroller does the LPC810.Pong2 use?

The LPC810.Pong2 is built around the LPC810M021FN8, from the NXP family.

How big is the LPC810.Pong2 PCB?

The LPC810.Pong2 measures 36.3 × 64 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LPC810.Pong2?

25 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the LPC810.Pong2 design files?

From the Hecatron-Cad/Hecatron.Kicad.General repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the LPC810.Pong2 design in my own project?

Yes, under the terms of its MIT license, which Hecatron-Cad chose for the repository.

Can I test firmware for the LPC810.Pong2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in Hecatron.Kicad.General

Similar boards