HardLabs

EGS-01-Switch-2

hedong2023·ovobot·EGS-01/cleanrobot-square-switch-2/cleanrobot-square-switch-2.kicad_pcb

EGS-01-Switch-2 PCB layout, top view — open source board by hedong2023

About the EGS-01-Switch-2 PCB

EGS-01-Switch-2 is an open source PCB design by hedong2023, published on GitHub. It is a 2-layer board measuring 26 × 38 mm, with 8 components from 8 distinct parts.

Other key parts include the RMW-H3638T-B. By type, the board carries 3 diodes, 1 IC, 1 connector, 1 switch, 1 capacitor and 1 resistor.

Main components on the EGS-01-Switch-2

RMW-H3638T-B

EGS-01-Switch-2 bill of materials (BOM)

8 components, 8 distinct parts.

QtyPartRefs
1
RMW-H3638T-B
U1
1
GH1.25MM/10ASMT
J1
1
6x6x4.5mm
SW1
1
LED_Dual_Red_Blue_AKAK
D1
1
LED_Dual_Orange_Green_AKAK
D2
1
WHLITE_LED
D3
1
0.1uF
C1
1
10K/1%
R1

EGS-01-Switch-2 design files

The KiCad project lives in the hedong2023/ovobot repository on GitHub; these links point at the commit this page was built from.

EGS-01-Switch-2: common questions

How big is the EGS-01-Switch-2 PCB?

The EGS-01-Switch-2 measures 26 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EGS-01-Switch-2?

8 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the EGS-01-Switch-2 design files?

From the hedong2023/ovobot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the EGS-01-Switch-2 design in my own project?

The repository has no license, so all rights stay with hedong2023. Use it as a reference, and ask the author before reusing the design.

More boards in ovobot