Mirror glove open hardware
About the Mirror glove open hardware PCB
Mirror glove open hardware is an open source PCB design by Henriquepr15, published on GitHub. It is a 2-layer board measuring 36.3 × 34.4 mm, with 44 components from 20 distinct parts.
Other key parts include the LMR51430YFDDCR. By type, the board carries 14 resistors, 11 connectors, 11 capacitors, 5 diodes, 1 IC and 1 test point.
It belongs with the wearables and sensors designs in this gallery.
From the project
Open hardware wearable interface for finger motion capture using flexible sensors, ESP32-C6, PCB design, firmware and gesture dataset for assistive technology research.
Main components on the Mirror glove open hardware
Mirror glove open hardware bill of materials (BOM)
44 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMR51430YFDDCR | SOT-23-THIN-6_DDC_TEX-L | U4 |
| 2 | Conn_01x10_Pin | PinSocket_1x10_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 5 | Conn_01x02_Socket | BorderTestPoint-2Pad | J5, J6, J7, J8, J9 |
| 2 | Conn_01x01_Pin | BorderTestPoint | J15, J16 |
| 1 | Conn_01x03_Socket | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J17 |
| 1 | TestPoint | BorderTestPoint | TP1 |
| 5 | R | LED_0603_1608Metric | D2, D4, D5, D6, D7 |
| 1 | 3,3 µH | L_Bourns-SRN4018 | L5 |
| 7 | 10µF | C_0805_2012Metric | C1, C2, C3, C4, C5, C14, C20 |
| 1 | 100 nF | C_0603_1608Metric | C12 |
| 2 | 4.7 | C_0805_2012Metric | C13, C18 |
| 1 | 100 | C_0603_1608Metric | C19 |
| 1 | 10k | R_0603_1608Metric | R1 |
| 1 | 5.1k | R_0603_1608Metric | R2 |
| 1 | 1k | R_0603_1608Metric | R5 |
| 4 | 300 | R_0603_1608Metric | R7, R8, R9, R10 |
| 5 | 33k | R_0603_1608Metric | R11, R12, R13, R14, R15 |
| 1 | 100k | R_0603_1608Metric | R24 |
| 1 | 13.7k | R_0603_1608Metric | R25 |
Mirror glove open hardware design files
The KiCad project lives in the Henriquepr15/mirror-glove-open-hardware repository on GitHub; these links point at the commit this page was built from.
Mirror glove open hardware: common questions
How big is the Mirror glove open hardware PCB?
The Mirror glove open hardware measures 36.3 × 34.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mirror glove open hardware?
44 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mirror glove open hardware design files?
From the Henriquepr15/mirror-glove-open-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mirror glove open hardware design in my own project?
The repository has no license, so all rights stay with Henriquepr15. Use it as a reference, and ask the author before reusing the design.
Similar boards
View screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k