11 open source boards using the LMR51430YFDDCR

Real designs built with the LMR51430YFDDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the LMR51430YFDDCR

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LMR51430YFDDCR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW_2 pin has a inductor on 8 of 8 designs, most often 3.3 µH (then 5.6 µH).
  • The SW_2 pin has a series capacitor on 8 of 8 designs, most often 100 nF.
  • The FB_4 pin has a resistor to GND on 8 of 8 designs, most often 6.49 kΩ (then 13.7 kΩ).
  • The CB_6 pin has a series capacitor on 8 of 8 designs, most often 100 nF.
GND_1pin 1Connected to: GND 100%
SW_2pin 2Connected to: Signal 100%
  • Inductor on 100% · 3.3 µH (2), 5.6 µH (1), 6.8 µH (1)
  • Series capacitor on 100% · 100 nF (7)
VIN_3pin 3Connected to: BATT 100%
  • Decoupling capacitor on 50% · 4.7 µF (2), 10 µF (2), 100 nF (2)
FB_4pin 4Connected to: Signal 100%
  • Resistor to GND on 100% · 6.49 kΩ (4), 13.7 kΩ (2), 22.1 kΩ (1)
  • Pull-up to 10V on 88% · 100 kΩ (6)
EN_5pin 5Connected to: 10V 88%
CB_6pin 6Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (7)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenFC-Lite-Mini by OpenDrone-hw, OpenAIO by OpenDrone-hw, Flighty by diaxxu and Mirror glove open hardware by Henriquepr15.

The LMR51430YFDDCR in open source designs

The gallery holds 11 open source boards using the LMR51430YFDDCR from 9 GitHub repositories; a typical one measures about 38.1 × 37.5 mm and carries around 97 components.

73% use four copper layers or more, and 45% carry an open source license.

The most starred is OpenFC-Lite-Mini by OpenDrone-hw.

Microcontrollers on boards using the LMR51430YFDDCR

What boards using the LMR51430YFDDCR are built for

LMR51430YFDDCR: common questions

Where can I find a LMR51430YFDDCR reference design?

Each of the 11 boards on this page is a real design using the LMR51430YFDDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LMR51430YFDDCR SW_2 pin connected?

The SW_2 pin has a inductor on 8 of 8 designs, most often 3.3 µH (then 5.6 µH). Counted from the KiCad layouts of 8 open source designs using the LMR51430YFDDCR.

What resistor goes on the LMR51430YFDDCR FB_4 pin?

The FB_4 pin has a resistor to GND on 8 of 8 designs, most often 6.49 kΩ (then 13.7 kΩ). Counted from the KiCad layouts of 8 open source designs using the LMR51430YFDDCR.

How is the LMR51430YFDDCR CB_6 pin connected?

The CB_6 pin has a series capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the LMR51430YFDDCR.

What parts are used alongside the LMR51430YFDDCR?

The SM06B-SRSS-TB(LF)(SN), TS2306A 240gf MSM 9, AIO_outline, AT32F421G8U7 and BMI270 appear in the most repositories here.

Which microcontrollers do boards using the LMR51430YFDDCR use?

Most are built on ESP32 (3), STM32 (3), NXP (1) and RP2040/RP2350 (1).

How big is a typical board using the LMR51430YFDDCR?

The median is 38.1 × 37.5 mm, and 27% are two-layer designs.

What is the most popular open source board using the LMR51430YFDDCR?

By GitHub stars, OpenFC-Lite-Mini by OpenDrone-hw, with 104 stars.

Can I simulate one of these boards using the LMR51430YFDDCR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part