Iris ring

HeyPCB·iris-ring·kicad/iris_ring.kicad_pcb

Iris ring PCB layout, top view — open source board by HeyPCB

About the Iris ring PCB

Iris ring is an open source PCB design by HeyPCB, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 18 × 17.4 mm, with 26 components from 4 distinct parts.

By type, the board carries 13 capacitors, 12 diodes and 1 resistor.

It belongs with the robotics & motion and displays & leds designs in this gallery.

From the project

Iris Ring: the 18 mm annular LED board behind each iris of the Iris robot head. 12 WS2812-2020 pixels around the camera lens. 2-layer, 0.8 mm KiCad 10 board, DRC-clean, with gerbers, BOM, CPL, STEP and renders.

The annular LED board behind each iris of Iris: 12 WS2812-2020 pixels on an 18 mm ring around the camera lens, two per head.

Part of Iris, the human-eyed robot head, HeyPCB's open robot boards. Designed end to end with the HeyPCB method on KiCad 10 (headless pipeline, Freerouting 2.4.1); every number below is measured on the files in this repository. Mentions of ./run.sh, docs/rules/, blocks/ or parts/ refer to the heypcb-kicad SDK that produced them.

Iris ring, from the project README
From the project README

Iris ring bill of materials (BOM)

26 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
12
WS2812C-2020-V1
D1, D2, D3, D4, D5, D6, D7, D8 +4
12
CL05B104KO5NNNC
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +4
1
CL05A475MP5NRNC
4.7uF
C13
1
0402WGF330JTCE
33
R1

Iris ring design files

The KiCad project lives in the HeyPCB/iris-ring repository on GitHub; these links point at the commit this page was built from.

Iris ring: common questions

How big is the Iris ring PCB?

The Iris ring measures 18 × 17.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Iris ring?

26 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Iris ring design files?

From the HeyPCB/iris-ring repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Iris ring design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which HeyPCB chose for the repository.

Similar boards