RCoV

himaldawadi11-sys·RCoV

RCoV PCB layout, top view — open source board by himaldawadi11-sys

About the RCoV PCB

RCoV is an open source PCB design by himaldawadi11-sys, published on GitHub. It is a 2-layer board measuring 98 × 96 mm, with 28 components from 10 distinct parts.

Other key parts include the NE555P. By type, the board carries 11 resistors, 6 transistors, 6 diodes, 2 battery holders, 1 IC and 1 switch.

From the project

An astronomy-themed PCB designed by SpaceYatri, made with KiCad.

An astronomy-themed PCB designed by SpaceYatri, made with KiCad.

The front has a gear and the club name. The back has a pulsar map (like the one on the Pioneer and Voyager spacecraft) and a falling meteor.

1. Install KiCad. 2. Download or clone this repository. 3. Open RCoV(PCB).kicadpro` in KiCad.

- 1 x NE555P timer IC (U1), DIP-8 - 6 x 5 mm LED (D1-D6) - 6 x 2N3904 NPN transistor (Q1-Q6), TO-92L - 6 x 470 ohm resistor (R1-R6) - 3 x 47 kohm resistor (R7, R8, R10) - 1 x 4.7 kohm resistor (R11) - 1 x photoresistor (R9) - 1 x 10 uF electrolytic capacitor (C1) - 1 x 6 mm push button (SW1) - 2…

RCoV, from the project README
From the project README

Main components on the RCoV

RCoV bill of materials (BOM)

28 components, 10 distinct parts.

QtyPartRefs
1
NE555P
U1
6
2N3904
Q1, Q2, Q3, Q4, Q5, Q6
2
Battery_Cell
BT1, BT2
1
SW_Push
SW1
6
LED
D1, D2, D3, D4, D5, D6
1
10uf
C1
6
470
R1, R2, R3, R4, R5, R6
3
47000
R7, R8, R10
1
R_Photo
R9
1
4700
R11

RCoV design files

The KiCad project lives in the himaldawadi11-sys/RCoV repository on GitHub; these links point at the commit this page was built from.

RCoV: common questions

How big is the RCoV PCB?

The RCoV measures 98 × 96 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RCoV?

28 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the RCoV design files?

From the himaldawadi11-sys/RCoV repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RCoV design in my own project?

The repository has no license, so all rights stay with himaldawadi11-sys. Use it as a reference, and ask the author before reusing the design.