JLinkV9-nano
HinsShum·JLinkV9-nano·hardware/JLinkV9-mini/JLinkV9-mini.kicad_pcb
About the JLinkV9-nano PCB
JLinkV9-nano is an open source STM32 PCB design by HinsShum, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 62 × 37 mm, with 60 components from 22 distinct parts.
Its main chip is the STM32F207VET6, from the STM32 family. Other key parts include the ME6210A33M3G. By type, the board carries 33 resistors, 15 capacitors, 4 connectors, 3 diodes, 2 ICs and 1 transistor.
Main components on the JLinkV9-nano
JLinkV9-nano bill of materials (BOM)
60 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ME6210A33M3G | SOT-23 | U1 |
| 1 | STM32F207VET6 | LQFP-100_14x14mm_P0.5mm | U2 |
| 1 | NEC3400 | SOT-23 | Q1 |
| 1 | 12M | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | Conn_01x04 | PinHeader_1x04_P2.00mm_Vertical | J2, J3 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.00mm_Vertical | J4 |
| 1 | Fuse | Fuse_0603_1608Metric | F1 |
| 1 | LED_R_Y | LED_Dual_0606 | D1 |
| 2 | UET14A05L03 | SOT-143 | D2, D3 |
| 1 | 10nF | C_0402_1005Metric | C1 |
| 3 | 10uF | C_0603_1608Metric | C2, C4, C6 |
| 2 | 22pF | C_0402_1005Metric | C3, C5 |
| 7 | 100nF | C_0402_1005Metric | C7, C8, C11, C12, C13, C14, C15 |
| 2 | 2.2uF | C_0402_1005Metric | C9, C10 |
| 2 | 1M | R_0402_1005Metric | R1, R22 |
| 1 | 0R | R_0603_1608Metric | R2 |
| 2 | 0R | R_0402_1005Metric | R3, R4 |
| 2 | 22R | R_0402_1005Metric | R5, R6 |
| 14 | 10K | R_0402_1005Metric | R7, R8, R9, R23, R24, R25, R26, R27 +6 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1K | R_0402_1005Metric | R10 |
| 11 | 100R | R_0402_1005Metric | R11, R12, R13, R14, R15, R16, R17, R18 +3 |
JLinkV9-nano design files
The KiCad project lives in the HinsShum/JLinkV9-nano repository on GitHub; these links point at the commit this page was built from.
JLinkV9-nano: common questions
What microcontroller does the JLinkV9-nano use?
The JLinkV9-nano is built around the STM32F207VET6, from the STM32 family.
How big is the JLinkV9-nano PCB?
The JLinkV9-nano measures 62 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the JLinkV9-nano?
60 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the JLinkV9-nano design files?
From the HinsShum/JLinkV9-nano repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the JLinkV9-nano design in my own project?
Yes, under the terms of its GPL-3.0 license, which HinsShum chose for the repository.
Can I test firmware for the JLinkV9-nano without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k