3 open source boards using the ME6210A33M3G
Real designs built with the ME6210A33M3G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
SuperPower-RPi
SensorsIot
65 × 56.5 mm98 parts2LCERN-OHL-W-2.0601FT81x Arduino Driver
blazer82
42.8 × 36.8 mm30 parts4LMIT58STM32
JLinkV9-nano
HinsShum
62 × 37 mm60 parts2LGPL-3.00
The ME6210A33M3G in open source designs
The gallery holds 3 open source boards using the ME6210A33M3G from 3 GitHub repositories; a typical one measures about 62 × 37 mm and carries around 60 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is SuperPower-RPi-KiCAD by SensorsIot.
Microcontrollers on boards using the ME6210A33M3G
ME6210A33M3G: common questions
Where can I find a ME6210A33M3G reference design?
Each of the 3 boards on this page is a real design using the ME6210A33M3G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ME6210A33M3G use?
Most are built on STM32 (2).
How big is a typical board using the ME6210A33M3G?
The median is 62 × 37 mm, and 67% are two-layer designs.
What is the most popular open source board using the ME6210A33M3G?
By GitHub stars, SuperPower-RPi-KiCAD by SensorsIot, with 601 stars.
Can I simulate one of these boards using the ME6210A33M3G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.