Iv dcy
hkr-ypt·iv-dcy·hardware/kicad/iv_dcy.kicad_pcb
About the Iv dcy PCB
Iv dcy is an open source STM32 PCB design by hkr-ypt, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 28 × 36 mm, with 18 components from 14 distinct parts.
Its main chip is the STMicroelectronics STM32F042K6T6, from the STM32 family. Other key parts include the Microchip MCP1700T-3302E/TT and STMicroelectronics USBLC6-2SC6. By type, the board carries 7 capacitors, 4 resistors, 3 ICs, 2 connectors, 1 switch and 1 diode.
From the project
A bus-powered USB-C board built around the STM32F042K6T6. Everything in this directory is generated from two source files:
A bus-powered USB-C board built around the STM32F042K6T6. Everything in this directory is generated from two source files:
All symbols and footprints come from the stock KiCad 9 libraries. There is no project-specific library. The KiCad files are ordinary KiCad 9 files that can be opened and edited directly. If you edit them by hand rather than through the Python sources, the next build.sh run overwrites the edits.
Main components on the Iv dcy
Iv dcy bill of materials (BOM)
18 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STMicroelectronics STM32F042K6T6 STM32F042K6T6 | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Microchip MCP1700T-3302E/TT MCP1700-3.3 | SOT-23 | U2 |
| 1 | STMicroelectronics USBLC6-2SC6 USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | GCT USB4105-GF-A USB_C_Receptacle | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Samtec FTSH-105-01-L-DV (or equivalent) SWD | PinHeader_2x05_P1.27mm_Vertical | J2 |
| 1 | Omron B3U-1000P BOOT | SW_SPST_B3U-1000P | SW1 |
| 1 | 0603 green LED green | LED_0603_1608Metric | D1 |
| 2 | 0603 1uF 16V X5R 1uF | C_0603_1608Metric | C1, C5 |
| 1 | 0603 4.7uF 10V X5R 4.7uF | C_0603_1608Metric | C2 |
| 3 | 0603 100nF 16V X7R 100nF | C_0603_1608Metric | C3, C4, C7 |
| 1 | 0603 10nF 50V X7R 10nF | C_0603_1608Metric | C6 |
| 2 | 0603 5.1k 1% 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 0603 10k 1% 10k | R_0603_1608Metric | R3 |
| 1 | 0603 1k 1% 1k | R_0603_1608Metric | R4 |
Iv dcy design files
The KiCad project lives in the hkr-ypt/iv-dcy repository on GitHub; these links point at the commit this page was built from.
Iv dcy: common questions
What microcontroller does the Iv dcy use?
The Iv dcy is built around the STMicroelectronics STM32F042K6T6, from the STM32 family.
How big is the Iv dcy PCB?
The Iv dcy measures 28 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Iv dcy?
18 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Iv dcy design files?
From the hkr-ypt/iv-dcy repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Iv dcy design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which hkr-ypt chose for the repository.
Can I test firmware for the Iv dcy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k