5 open source boards using the STMicroelectronics USBLC6-2SC6
Real designs built with the STMicroelectronics USBLC6-2SC6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Power feed manual mill
liorknafo
100 × 100 mm191 parts4LNo license0PocketBeagleCommandStation SMD
RobertPHeller
118.1 × 105.4 mm131 parts4LCC-BY-4.00ESP32
Flora
frandorturtles
56.4 × 52.9 mm43 parts2LMIT0STM32
Iv dcy
hkr-ypt
28 × 36 mm18 parts2LCERN-OHL-S-2.00PocketBeagleCommandStation SMD RevB 2L
RobertPHeller
118.1 × 105.4 mm128 parts2LCC-BY-4.00
The STMicroelectronics USBLC6-2SC6 in open source designs
The gallery holds 5 open source boards using the STMicroelectronics USBLC6-2SC6 from 4 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 128 components.
60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Power feed manual mill by liorknafo.
Microcontrollers on boards using the STMicroelectronics USBLC6-2SC6
What boards using the STMicroelectronics USBLC6-2SC6 are built for
STMicroelectronics USBLC6-2SC6: common questions
Where can I find a STMicroelectronics USBLC6-2SC6 reference design?
Each of the 5 boards on this page is a real design using the STMicroelectronics USBLC6-2SC6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STMicroelectronics USBLC6-2SC6 use?
Most are built on ESP32 (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the STMicroelectronics USBLC6-2SC6?
The median is 100 × 100 mm, and 60% are two-layer designs.
What is the most popular open source board using the STMicroelectronics USBLC6-2SC6?
By GitHub stars, Power feed manual mill by liorknafo, with 0 stars.
Can I simulate one of these boards using the STMicroelectronics USBLC6-2SC6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.