STM32Node

Hoernchen20·STM32Node

STM32Node PCB layout, top view — open source STM32 board by Hoernchen20

About the STM32Node PCB

STM32Node is an open source STM32 PCB design by Hoernchen20, published on GitHub. It is a 2-layer board measuring 76 × 76 mm, with 7 components from 7 distinct parts.

Its main chip is the stm32f103c8t6-module-china, from the STM32 family. Other key parts include the RFM95W-868S2. By type, the board carries 4 connectors, 2 ICs and 1 capacitor.

It belongs with the rf & radio designs in this gallery.

From the project

Simple prototyping board for LoRa with STM32F103 (BluePill) and RFM95

Simple prototyping board for LoRa with STM32F103 (BluePill) and RFM95

https://github.com/myelin/myelin-kicad-libraries (STM32 module KiCad library)

STM32Node, from the project README
From the project README

Main components on the STM32Node

STM32Node bill of materials (BOM)

7 components, 7 distinct parts.

QtyPartRefs
1
stm32f103c8t6-module-china
U1
1
RFM95W-868S2
U2
1
Conn_01x20
J1
1
Conn_01x16
J2
1
Conn_Coaxial
J3
1
Conn_01x03
J4
1
100n
C1

STM32Node design files

The KiCad project lives in the Hoernchen20/STM32Node repository on GitHub; these links point at the commit this page was built from.

STM32Node: common questions

What microcontroller does the STM32Node use?

The STM32Node is built around the stm32f103c8t6-module-china, from the STM32 family.

How big is the STM32Node PCB?

The STM32Node measures 76 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32Node?

7 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32Node design files?

From the Hoernchen20/STM32Node repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the STM32Node design in my own project?

The repository has no license, so all rights stay with Hoernchen20. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32Node without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards