68 open source boards using the RFM95W-868S2
Real designs built with the RFM95W-868S2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32-S2-DevBoardTFT
ccadic
41.9 × 88.9 mm24 parts2LNo license79ESP32
D4 small
unsurv
32 × 45 mm53 parts4LGPL-3.073STM32
WARS-Birdhouse
brucemack
57 × 35.5 mm20 parts2LGPL-3.066STM32
Tracker v1
angelnu
56.5 × 66.8 mm36 parts2LMIT22STM32
Gesc
CTSchorsch
111 × 111 mm150 parts4LNo license17ESP32
Feuchtraumabzweigdose
transportkollektiv
45.7 × 63.5 mm35 parts2LCC-BY-4.014ESP32
Lora node esp32 smd GPS
Christophe45
71.1 × 109.2 mm32 parts2LNo license14STM32
180516-Elektor LoRa Node
ElektorLabs
61.5 × 34 mm57 parts2LNo license11Microchip SAM
Lora - RS485 bridge
RainDrop-lora
63 × 50 mm62 parts4LApache-2.010ESP32
Hardware v2
rmingon
40 × 78 mm54 parts2LNo license10Microchip SAM
CatWAN Relay
ElectronicCats
50 × 86.9 mm48 parts2LNo license7ESP32
Vandal
blinken
147 × 92 mm213 parts2LGPL-3.06STM32
EcoApi BeeHiveMonitoring
EcoApi
90.6 × 58 mm166 parts2LGPL-3.04ESP32
WifiWallSwitch
Uspizig
65.4 × 68 mm141 parts2LGPL-3.04STM32
Flight-Computer
SunDevilRocketry
93.7 × 43.7 mm109 parts4LNo license4AVR/Arduino
Ws 3.0
boanjo
72.7 × 114 mm53 parts2LNo license4Morphesp240-addon devboard
ccadic
41.9 × 88.9 mm24 parts2LNo license4Microchip SAM
CatWAN Citizen
ElectronicCats
52 × 80 mm66 parts2LAGPL-3.03ESP32
Esp32LoraBoard
vrees
72 × 65 mm54 parts2LNo license3Microchip SAM
CatWAN Tracker Vehicular
ElectronicCats
71.1 × 42.9 mm53 parts2LNo license3ESP32
PickleRick
icl-rocketry
100 × 37 mm196 parts6LMIT2ESP32
Long range remote lora nrf wifi bluetooth
rmingon
100 × 100 mm42 parts2LCERN-OHL-S-2.02ESP32
VLAD-CanSat
icl-rocketry
90 × 80 mm84 parts2LNo license1STM32
Kicad rfm95-breakout board
Bamelink
69.2 × 67 mm60 parts2LNo license1STM32
Stm32 LORA TEMP PWM
Heorenmaru
55.3 × 35.9 mm58 parts2LCC-BY-SA-4.01Nordic nRF
Nrf52board
dimka-rs
27.9 × 59.7 mm40 parts2LNo license1- schematic only · 7 partsRP2040/RP2350
Steganon-1
VAIBHAV3129
7 partsMIT1 RP2040/RP2350
Onboard Computer
onionsat-pcbs
50 × 50 mm170 parts8LNo license0STM32
WeatherStation mfg
ppusapati
100 × 80 mm117 parts4LNo license0STM32
Main
vives-projectwerk-2021
80 × 70 mm64 parts4LNo license0RP2040/RP2350
Glidesat
hjw1112
51.8 × 42 mm62 parts4LNo license0STM32
Picoballoon2020
kajusK
22.3 × 49.9 mm62 parts2LGPL-3.00NXP
Flight-Computer
Tim-Drake0
82 × 38 mm61 parts2LNo license0ESP32
Wasserstand harry b
vrees
72 × 65 mm54 parts2LNo license0ESP32
STARTUP
mohamed1920said
130 × 77 mm54 parts4LNo license0AVR/Arduino
GMote Small
hackdaworld
42.6 × 33 mm28 parts2LGPL-3.00
How designs wire the RFM95W-868S2
Read from the KiCad layouts of 44 open source designs, one per repository: what each pin of the RFM95W-868S2 connects to, and the resistors, capacitors and other passives placed on it.
- The 3.3V pin is tied to 3.3V on 42 of 44 designs.
- The DIO3 pin is left unconnected on 36 of 44 designs (a signal on 8).
- The DIO4 pin is left unconnected on 36 of 44 designs (a signal on 8).
- The DIO5 pin is left unconnected on 33 of 44 designs (a signal on 11).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 8, 10 | Connected to: GND 95% | — |
| DIO5pin 7 | Connected to: Not connected 75% · a signal 25% | — |
| DIO3pin 11 | Connected to: Not connected 82% · a signal 18% | — |
| DIO4pin 12 | Connected to: Not connected 82% · a signal 18% | — |
| 3.3Vpin 13 | Connected to: 3.3V 95% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-S2-DevBoardTFT by ccadic, D4 small pcb by unsurv, WARS-Birdhouse by brucemack and GenericSensor v2 by angelnu.
The RFM95W-868S2 in open source designs
The gallery holds 68 open source boards using the RFM95W-868S2 from 47 GitHub repositories; a typical one measures about 59.3 × 65 mm and carries around 47 components.
72% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is ESP32-S2-DevBoardTFT by ccadic.
Parts used alongside the RFM95W-868S2
Microcontrollers on boards using the RFM95W-868S2
What boards using the RFM95W-868S2 are built for
RFM95W-868S2: common questions
Where can I find a RFM95W-868S2 reference design?
Each of the 68 boards on this page is a real design using the RFM95W-868S2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the RFM95W-868S2 3.3V pin connected?
The 3.3V pin is tied to 3.3V on 42 of 44 designs. Counted from the KiCad layouts of 44 open source designs using the RFM95W-868S2.
How is the RFM95W-868S2 DIO3 pin connected?
The DIO3 pin is left unconnected on 36 of 44 designs (a signal on 8). Counted from the KiCad layouts of 44 open source designs using the RFM95W-868S2.
How is the RFM95W-868S2 DIO4 pin connected?
The DIO4 pin is left unconnected on 36 of 44 designs (a signal on 8). Counted from the KiCad layouts of 44 open source designs using the RFM95W-868S2.
What parts are used alongside the RFM95W-868S2?
The ESP32-WROOM-32, AMS1117-3.3, AP2112K-3.3, BME280 and BMP280 appear in the most repositories here.
Which microcontrollers do boards using the RFM95W-868S2 use?
Most are built on ESP32 (21), STM32 (21), AVR/Arduino (8) and Microchip SAM (5).
How big is a typical board using the RFM95W-868S2?
The median is 59.3 × 65 mm, and 72% are two-layer designs.
What is the most popular open source board using the RFM95W-868S2?
By GitHub stars, ESP32-S2-DevBoardTFT by ccadic, with 79 stars.
Can I simulate one of these boards using the RFM95W-868S2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.