MP-Fetak
hovorkav·MP-Fetak
About the MP-Fetak PCB
MP-Fetak is an open source PCB design by hovorkav, published on GitHub. It is a 2-layer board, with 49 components from 20 distinct parts.
Other key parts include the AP63205WU. By type, the board carries 23 capacitors, 12 resistors, 3 connectors, 2 ICs, 2 diodes and 2 inductors.
From the project
Pokračování prokleté ročníkové práce
Main components on the MP-Fetak
MP-Fetak bill of materials (BOM)
49 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63205WU | TSOT-23-6 | U2 |
| 1 | — | U3 | |
| 1 | Conn_01x08_Pin | Amphenol_F32Q-1A7x1-11008_1x08-1MP_P0.5mm_Horizontal | J2 |
| 1 | BUTTONS | Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_Horizontal | J4 |
| 1 | Micro_SD_Card_Det2 | microSD_HC_Hirose_DM3BT-DSF-PEJS | J13 |
| 1 | Conn_01x15_Pin | Hirose_FH12-15S-0.5SH_1x15-1MP_P0.50mm_Horizontal | CAM_IN1 |
| 1 | AP63200WU | TSOT-23-6 | CONV4 |
| 1 | Conn_01x15_Socket | Hirose_FH12-15S-0.5SH_1x15-1MP_P0.50mm_Horizontal | DISPLAY_IN1 |
| 1 | TXS0108EPW | TSSOP-20_4.4x6.5mm_P0.65mm | LOGIC_CONVERT1 |
| 1 | SPH0641LU4H-1 | Knowles_LGA-5_3.5x2.65mm | MK1 |
| 1 | 5V7 Zener | D_SOD-123 | D2 |
| 1 | 6V2 Zener | D_SOD-123 | D3 |
| 2 | 10uH | L_0603_1608Metric | L3, L4 |
| 4 | 10uF | C_0603_1608Metric | C3, C30, C44, C49 |
| 15 | 100nF | C_0402_1005Metric | C4, C29, C43, C45, C48, C50, C53, C54 +7 |
| 4 | 22uF | C_0603_1608Metric | C46, C47, C51, C52 |
| 1 | 16k | R_0603_1608Metric | R6 |
| 1 | 100k | R_0603_1608Metric | R7 |
| 9 | 10k | R_0603_1608Metric | R15, R16, R17, R18, R19, R20, R21, R22 +1 |
| 1 | 330R | R_0603_1608Metric | R50 |
MP-Fetak design files
The KiCad project lives in the hovorkav/MP-Fetak repository on GitHub; these links point at the commit this page was built from.
- LayoutMP-Fetak.kicad_pcb
- SchematicMP-Fetak.kicad_sch
MP-Fetak: common questions
How big is the MP-Fetak PCB?
The MP-Fetak has 2 copper layers and is 1.6 mm thick.
How many components are on the MP-Fetak?
49 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the MP-Fetak design files?
From the hovorkav/MP-Fetak repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MP-Fetak design in my own project?
The repository has no license, so all rights stay with hovorkav. Use it as a reference, and ask the author before reusing the design.