HardLabs

Coupler board

hrl-labs-clinic-24-25·hardware-prototyping·Project_Files/coupling_board_kicad/coupling_board_v2/Kicad-project/coupler_board/coupler_board.kicad_pcb

Coupler board layout, top view — open source board by hrl-labs-clinic-24-25
Simulate this board

About the Coupler board

Coupler board is an open source PCB design by hrl-labs-clinic-24-25, published on GitHub. It is a 2-layer board measuring 96 × 70 mm, with 9 components from 5 distinct parts.

From the project

Mostly arduino code for simulating the output of the FPGA. Mainly used to control DACs with SPI.

Coupler board bill of materials (BOM)

9 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
Molex Microfit
J1, J7, J8, J9
1
CONN_02X12_ODD_EVEN
Conn_02x12_Odd_Even
J2
1
MOLEX6
Molex6
J3
1
CONN_02X12_ODD_EVEN
Conn_02x12_Odd_Even
J4
2
DB25_SOCKET
DB25_Socket
J5, J6

Coupler board design files

The KiCad project lives in the hrl-labs-clinic-24-25/hardware-prototyping repository on GitHub; these links point at the commit this page was built from.

Coupler board: common questions

How big is the Coupler board?

The Coupler board measures 96 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Coupler board?

9 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Coupler board design files?

From the hrl-labs-clinic-24-25/hardware-prototyping repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Coupler board design in my own project?

The repository has no license, so all rights stay with hrl-labs-clinic-24-25. Use it as a reference, and ask the author before reusing the design.

More boards in hardware-prototyping