12v rgb led strip common anode driver
Hrushal-Nikhare·12v-rgb-led-strip-common-anode-driver

About the 12v rgb led strip common anode driver PCB
12v rgb led strip common anode driver is an open source PCB design by Hrushal-Nikhare, published on GitHub under the Unlicense license. It is a board, with 9 components from 8 distinct parts.
Other key parts include the NE555P. By type, the board carries 2 diodes, 2 capacitors, 2 resistors, 1 IC and 1 transistor.
From the project
12v rgb led strip common anode driver
Vcc is 12V pin 3 of IRFZ44N goes to the respective color you want to modulate Duty Cycle: 99.8%
https://github.com/user-attachments/assets/7e8570b3-aaa5-4310-8fb2-1cdb0d6227dd
Main components on the 12v rgb led strip common anode driver
12v rgb led strip common anode driver bill of materials (BOM)
9 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | IRFZ44N | TO-220-3_Vertical | Q2 |
| 1 | 10K 10k | FanPinHeader_1x03_P2.54mm_Vertical | RV1 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 10NF 10nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 100NF 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
12v rgb led strip common anode driver design files
The KiCad project lives in the Hrushal-Nikhare/12v-rgb-led-strip-common-anode-driver repository on GitHub; these links point at the commit this page was built from.
- SchematicRgb array.kicad_sch
- BOMBom.csv
12v rgb led strip common anode driver: common questions
How many components are on the 12v rgb led strip common anode driver?
9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 12v rgb led strip common anode driver design files?
From the Hrushal-Nikhare/12v-rgb-led-strip-common-anode-driver repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the 12v rgb led strip common anode driver design in my own project?
Yes, under the terms of its Unlicense license, which Hrushal-Nikhare chose for the repository.