STM32C071 Dev Board

htminuslab·STM32C071_Dev_Board·KiCAD/stm32c071devboard.kicad_pcb

STM32C071 Dev Board layout, top view — open source STM32 board by htminuslab

About the STM32C071 Dev Board

STM32C071 Dev Board is an open source STM32 PCB design by htminuslab, published on GitHub under the MIT license. It is a 2-layer board measuring 38.4 × 19.3 mm, with 24 components from 14 distinct parts.

Its main chip is the STM32C071G8U6N, from the STM32 family. Other key parts include the TPS73633DBV. By type, the board carries 7 capacitors, 7 resistors, 5 connectors, 3 diodes and 2 ICs.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

STM32C071G86N Development Board

Note this board has not yet been manufacturered (JLCPCB gave a quote for £47{UK} for 5 Boards).

The boards is nothing more but a USB-C connector, STM32C071 and a 3.3v power regulator. Schematics/PBC/Manufacturing data is located in the KiCAD directory.

STM32 is a registered trademark of STMicroelectronics International N.V.

STM32C071 Dev Board, from the project README
From the project README

Main components on the STM32C071 Dev Board

STM32C071G8U6NTPS73633DBV

STM32C071 Dev Board bill of materials (BOM)

24 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32C071G8U6N
STM32C071G8UxN
U1
1
TPS73633DBV
U3
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J1
2
Conn_01x14_Pin
J2, J4
1
Conn_01x01_Pin
J3
1
Conn_01x02_Pin
J5
2
LED
D1, D3
1
SP0503BAHT
D2
2
1UF
1uF
C1, C3
4
100NF
100nF
C2, C4, C6, C7
1
4.7UF
4.7uF
C5
3
1K5
R1, R4, R5
2
5K1
R2, R3
2
10K
R6, R7

STM32C071 Dev Board design files

The KiCad project lives in the htminuslab/STM32C071_Dev_Board repository on GitHub; these links point at the commit this page was built from.

STM32C071 Dev Board: common questions

What microcontroller does the STM32C071 Dev Board use?

The STM32C071 Dev Board is built around the STM32C071G8U6N, from the STM32 family.

How big is the STM32C071 Dev Board?

The STM32C071 Dev Board measures 38.4 × 19.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32C071 Dev Board?

24 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32C071 Dev Board design files?

From the htminuslab/STM32C071_Dev_Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32C071 Dev Board design in my own project?

Yes, under the terms of its MIT license, which htminuslab chose for the repository.

Can I test firmware for the STM32C071 Dev Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards