Battery power module
hugo2080·Battery_power_module·hardware/Battery power module.kicad_pcb
About the Battery power module
Battery power module is an open source PCB design by hugo2080, published on GitHub under the MIT license. It is a 2-layer board measuring 20 × 26 mm, with 14 components from 11 distinct parts.
Other key parts include the BQ24090DGQ. By type, the board carries 6 resistors, 3 diodes, 2 capacitors, 1 IC and 1 connector.
It belongs with the power & battery and wearables designs in this gallery.
From the project
Battery power module for bathroom scale
Place a 0.7 V forward voltage rectifier diode, e.g. 1N4007, between pin 2 of connector J2 and VDD of the MCU board, with the anode facing J2, to reduce the voltage to a safe 3.6 V.
This project is released under the CERN Open Hardware Licence v1.2.
Hardware Documentation: Licensed under the terms of CERN OHL v.1.2. See cernohlv12.txt for the full license text. Software/Firmware: none. Documentation Location: https://github.com/hugo2080/Batterypower_module
Main components on the Battery power module
Battery power module bill of materials (BOM)
14 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ24090DGQ | HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.57x1.88mm_ThermalVias | U1 |
| 1 | USB_C_RECEPTACLE_POWERONLY_6P USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
| 1 | Thermistor_NTC | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | TH1 |
| 1 | GREEN | LED_0805_2012Metric | D1 |
| 1 | RED | LED_0805_2012Metric | D2 |
| 1 | D_TVS | D_SMB | D3 |
| 2 | 1u | C_0603_1608Metric | C1, C2 |
| 2 | 1,5k | R_0603_1608Metric | R1, R2 |
| 1 | 1k | R_0603_1608Metric | R3 |
| 1 | 2k | R_0603_1608Metric | R4 |
| 2 | 5,1k | R_0603_1608Metric | R5, R6 |
Battery power module design files
The KiCad project lives in the hugo2080/Battery_power_module repository on GitHub; these links point at the commit this page was built from.
Battery power module: common questions
How big is the Battery power module?
The Battery power module measures 20 × 26 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Battery power module?
14 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Battery power module design files?
From the hugo2080/Battery_power_module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Battery power module design in my own project?
Yes, under the terms of its MIT license, which hugo2080 chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkDriver
scottbez1
198.1 × 30.5 mm58 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k