5 open source boards using the BQ24090DGQ
Real designs built with the BQ24090DGQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
${title}
hanebefl
132.5 × 82 mm91 parts4LNo license6ESP32
12 class notes
bob4o-afk
49.6 × 49.6 mm43 parts2LNo license43S-parallel-Lithium ion-Battery charging circuit
Mohamed-U3
20 × 37.4 mm36 parts2LMIT1ESP32
Steer32
jpt1729
29 × 62.2 mm49 parts2LNo license0Battery power module
hugo2080
20 × 26 mm14 parts2LMIT0
How designs wire the BQ24090DGQ
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BQ24090DGQ connects to, and the resistors, capacitors and other passives placed on it.
- The TS pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ.
- The ISET pin has a resistor to GND on 4 of 5 designs, most often 1 kΩ (then 536 Ω).
- The PRETERM pin has a resistor to GND on 4 of 5 designs, most often 2 kΩ (then 1 kΩ).
- The IN pin is tied to VBUS on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: VBUS 80% · a signal 20% | — |
| ISETpin 2 | Connected to: Signal 100% |
|
| VSSpin 3, 11 | Connected to: GND 100% | — |
| PRETERMpin 4 | Connected to: Signal 80% · not connected 20% |
|
| NCpin 6 | Connected to: Not connected 100% | — |
| CHGpin 8 | Connected to: Signal 100% |
|
| TSpin 9 | Connected to: Signal 100% |
|
| OUTpin 10 | Connected to: BATT 80% · a signal 20% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ${title} by hanebefl, 12 class notes by bob4o-afk, 3S-parallel-Lithium ion-Battery charging circuit by Mohamed-U3 and Battery power module by hugo2080.
The BQ24090DGQ in open source designs
The gallery holds 5 open source boards using the BQ24090DGQ from 5 GitHub repositories; a typical one measures about 29 × 49.6 mm and carries around 43 components.
80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is ${title} by hanebefl.
Parts used alongside the BQ24090DGQ
Microcontrollers on boards using the BQ24090DGQ
What boards using the BQ24090DGQ are built for
BQ24090DGQ: common questions
Where can I find a BQ24090DGQ reference design?
Each of the 5 boards on this page is a real design using the BQ24090DGQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the BQ24090DGQ TS pin?
The TS pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the BQ24090DGQ.
What resistor goes on the BQ24090DGQ ISET pin?
The ISET pin has a resistor to GND on 4 of 5 designs, most often 1 kΩ (then 536 Ω). Counted from the KiCad layouts of 5 open source designs using the BQ24090DGQ.
What resistor goes on the BQ24090DGQ PRETERM pin?
The PRETERM pin has a resistor to GND on 4 of 5 designs, most often 2 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the BQ24090DGQ.
Which microcontrollers do boards using the BQ24090DGQ use?
Most are built on ESP32 (3).
How big is a typical board using the BQ24090DGQ?
The median is 29 × 49.6 mm, and 80% are two-layer designs.
What is the most popular open source board using the BQ24090DGQ?
By GitHub stars, ${title} by hanebefl, with 6 stars.
Can I simulate one of these boards using the BQ24090DGQ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.