HardLabs

Pressure STM32F030F4

HW9711·Pressure_STM32F030F4·EIDE/压力传感器采集板.net

This repository ships a schematic but no board layout.

About the Pressure STM32F030F4 PCB

Pressure STM32F030F4 is an open source STM32 PCB design by HW9711, published on GitHub. It is a board, with 37 components from 18 distinct parts.

Its main chip is the STM32F030F4P6TR, from the STM32 family. Other key parts include the TL431BIDR, AMS1117-3.3V, CS1237-SOP8 and AH502. By type, the board carries 15 capacitors, 9 resistors, 8 ICs, 2 connectors, 1 crystal and 1 diode.

Main components on the Pressure STM32F030F4

TL431BIDRAMS1117-3.3VCS1237-SOP8STM32F030F4P6TRAH502

Pressure STM32F030F4 bill of materials (BOM)

37 components, 18 distinct parts.

QtyPartRefs
1
TL431BIDR
U1
1
AMS1117-3.3V
U2
1
CS1237-SOP8
U3
1
STM32F030F4P6TR
U4
4
AH502
U5, U6, U7, U8
1
A308000003
Y1
2
0901201084
J1, J2
1
FPC-05F-6PH20
FPC1
1
XL-1608SURC-06
D1
2
VJ0402V104MXJCW1BC
C1, C3
10
CL05B104KO5NNNC
C2, C4, C5, C6, C10, C11, C12, C13 +2
1
CL05A106MQ5NUNC
C7
2
0402YA200JAT2A
C8, C9
2
RT0402BRD071KL
R1, R3
2
CR-03FL7----0R
R2, R10
2
RC0402FR-07100RL
R4, R5
2
TNPW060310K0BEEN
R8, R11
1
CR-03FL7----0R
NC----0R
R9

Pressure STM32F030F4 design files

The KiCad project lives in the HW9711/Pressure_STM32F030F4 repository on GitHub; these links point at the commit this page was built from.

Pressure STM32F030F4: common questions

What microcontroller does the Pressure STM32F030F4 use?

The Pressure STM32F030F4 is built around the STM32F030F4P6TR, from the STM32 family.

How many components are on the Pressure STM32F030F4?

37 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pressure STM32F030F4 design files?

From the HW9711/Pressure_STM32F030F4 repository on GitHub, which has a netlist; the links under Design files point to each one.

Can I use the Pressure STM32F030F4 design in my own project?

The repository has no license, so all rights stay with HW9711. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pressure STM32F030F4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards