3 open source boards using the AMS1117 3.3v
Real designs built with the AMS1117 3.3v, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Gotek-Compatible-AT32F435-26Pin
liveboxandy
111.6 × 59.4 mm72 parts2LCC0-1.03
PCB V0.6.3
ARTS-Laboratory
33 × 122.1 mm30 parts2LCC-BY-SA-4.02
AVR/ArduinoEasyduino Atmega
Hanqaqa
68.8 × 53.6 mm35 parts4LCERN-OHL-P-2.0746
The AMS1117 3.3v in open source designs
The gallery holds 3 open source boards using the AMS1117 3.3v from 3 GitHub repositories; a typical one measures about 68.8 × 59.4 mm and carries around 35 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Easyduino Atmega by Hanqaqa.
Microcontrollers on boards using the AMS1117 3.3v
What boards using the AMS1117 3.3v are built for
AMS1117 3.3v: common questions
Where can I find a AMS1117 3.3v reference design?
Each of the 3 boards on this page is a real design using the AMS1117 3.3v. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AMS1117 3.3v use?
Most are built on AVR/Arduino (1).
How big is a typical board using the AMS1117 3.3v?
The median is 68.8 × 59.4 mm, and 67% are two-layer designs.
What is the most popular open source board using the AMS1117 3.3v?
By GitHub stars, Easyduino Atmega by Hanqaqa, with 746 stars.
Can I simulate one of these boards using the AMS1117 3.3v before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.