ORION boost v3
ibis-ssl·ORION_boost_v3
About the ORION boost v3 PCB
ORION boost v3 is an open source STM32 PCB design by ibis-ssl, published on GitHub. It is a 4-layer board measuring 92 × 119 mm, with 144 components from 49 distinct parts.
Its main chip is the STM32F303CBTX, from the STM32 family. Other key parts include the LTC2875-S8 and INA199. By type, the board carries 42 resistors, 33 capacitors, 24 diodes, 16 connectors, 10 transistors and 3 ICs.
From the project
orion 電源昇圧回路
Main components on the ORION boost v3
ORION boost v3 bill of materials (BOM)
144 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F303CBTX STM32F303CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | LTC2875-S8 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | INA199 | SOT-363_SC-70-6 | U4 |
| 2 | Q_NMOS_GDS | TO-252-2_diff | Q1, Q2 |
| 2 | Q_NMOS_GSD | SOT-23 | Q3, Q10 |
| 1 | Q_PMOS_GDS | TO-252-2 | Q4 |
| 1 | Q_NMOS_GDS | TO-220F-3_Horizontal_TabDown_HV_INV_diff | Q5 |
| 4 | Q_NMOS_GDS | TO-252-2 | Q6, Q7, Q8, Q9 |
| 1 | ceralock | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | X1 |
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | Hirose_DF11-8DP-2DSA_2x04_P2.00mm_Vertical | J1 |
| 1 | CONN_01X10 Conn_01x10 | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 2 | CONN_01X03 Conn_01x03 | VX07805-500 | J3, J4 |
| 2 | CONN_01X01 Conn_01x01 | TestPoint_Plated_Hole_D4.0mm | J5, J6 |
| 1 | CONN_01X02 Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J7 |
| 2 | CONN_01X02 Conn_01x02 | PinHeader_2x01_P2.00mm_Vertical_SMD | J8, J9 |
| 1 | CONN_01X06 | ZH_B6B-ZR | P1 |
| 4 | CONN_01X02 | Hirose_DF63M-2P-3.96DSA_1x02_P3.96mm_Vertical_pinless | P2, P3, P4, P5 |
| 2 | CONN_01X02 | AMASS_XT30U-M_1x02_P5.0mm_Vertical | P6, P7 |
| 1 | Fuse | Reusable_Breaker_Top | F1 |
| 1 | Fuse | C_Disc_D8.0mm_W2.5mm_P5.00mm | F2 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Fuse | Fuse_1210_3225Metric | F3 |
| 1 | MCP1402T | SOT-23-5 | GD1 |
| 2 | JUMPER_3_OPEN Jumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 3 | TLP117 | MFSOP6-5_4.4x3.6mm_P1.27mm | PC1, PC2, PC3 |
| 3 | SW_Push | SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2, SW3 |
| 1 | Thermistor | R_0603_1608Metric | TH1 |
| 7 | LED | LED_0603_1608Metric | D1, D2, D3, D4, D5, D18, D22 |
| 1 | D | D_PowerDI-123 | D6 |
| 8 | LED | LED_D3.0mm | D7, D8, D9, D10, D11, D12, D13, D14 |
| 1 | D_ZENER_3.3V D_Zener_3.3V | D_0603_1608Metric | D15 |
| 1 | D | D_MiniMELF | D16 |
| 1 | D_Zener | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D17 |
| 3 | D | TO-252-2-RD | D19, D20, D21 |
| 2 | D | D_0603_1608Metric | D23, D24 |
| 1 | FerriteBead | R_0603_1608Metric | FB1 |
| 1 | 10UH 10uH | L_Bourns_SRP1770TA_16.9x16.9mm | L1 |
| 13 | 0.1U 0.1u | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +5 |
| 8 | 1u | C_0603_1608Metric | C13, C14, C19, C21, C22, C30, C31, C32 |
| 8 | 4.7U 4.7u | C_1206_3216Metric | C15, C16, C17, C18, C23, C24, C25, C26 |
| 2 | 150U 150u | CP_Radial_D8.0mm_P5.00mm | C20, C33 |
| 2 | 0.1U 0.1u | C_Rect_L16.5mm_W5.0mm_P15.00mm_MKT | C27, C28 |
| 11 | 1k | R_0603_1608Metric | R1, R7, R15, R20, R21, R22, R24, R25 +3 |
| 10 | 10K 10k | R_0603_1608Metric | R2, R9, R10, R11, R14, R18, R19, R23 +2 |
| 5 | 4.7K 4.7k | R_0603_1608Metric | R3, R4, R5, R6, R38 |
| 1 | 120 | R_0603_1608Metric | R8 |
| 7 | 100 | R_0603_1608Metric | R12, R13, R16, R17, R28, R32, R41 |
| 1 | 10M 10m | R_1020_2550Metric | R26 |
| 6 | 10 | R_0603_1608Metric | R27, R29, R33, R34, R39, R40 |
| 1 | 1M | R_1206_3216Metric | R37 |
ORION boost v3 design files
The KiCad project lives in the ibis-ssl/ORION_boost_v3 repository on GitHub; these links point at the commit this page was built from.
- LayoutORION_boost_v3.kicad_pcb
- SchematicORION_boost_v3.kicad_sch
- BOMproduction/bom.csv
ORION boost v3: common questions
What microcontroller does the ORION boost v3 use?
The ORION boost v3 is built around the STM32F303CBTX, from the STM32 family.
How big is the ORION boost v3 PCB?
The ORION boost v3 measures 92 × 119 mm, has 4 copper layers and is 1.56 mm thick.
How many components are on the ORION boost v3?
144 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ORION boost v3 design files?
From the ibis-ssl/ORION_boost_v3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ORION boost v3 design in my own project?
The repository has no license, so all rights stay with ibis-ssl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ORION boost v3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k