Energy meter

Ignjat02·Energy-meter-PCB

Energy meter PCB layout, top view — open source STM32 board by Ignjat02

About the Energy meter PCB

Energy meter is an open source STM32 PCB design by Ignjat02, published on GitHub. It is a 2-layer board measuring 84.5 × 68.9 mm, with 66 components from 31 distinct parts.

Its main chip is the STM32F373CCTx, from the STM32 family. Other key parts include the ATM90E26-YU-R, USBLC6-2SC6, AP2213M-3.3TRG1 and BM70BLES1FC2-0B03AA. By type, the board carries 27 capacitors, 19 resistors, 5 ICs, 5 switches, 5 diodes and 3 connectors.

It belongs with the iot & wireless and test & measurement designs in this gallery.

From the project

A single-phase energy meter designed and built for the OhmSprint competition (Belgrade, April–May 2026). The board handles AC current sensing, energy measurement, microcontroller processing, and Bluetooth data output — all on a compact 2-layer PCB within a sub-€50 BOM.

A single-phase energy meter designed and built for the OhmSprint competition (Belgrade, April–May 2026). The board handles AC current sensing, energy measurement, microcontroller processing, and Bluetooth data output — all on a compact 2-layer PCB within a sub-€50 BOM.

- Current: SCT013 non-invasive current transformer connected via a 2-pin JST connector (J2) with a burden resistor network (R2, R3) and biasing to mid-supply - Voltage: Resistive divider on the AC line input (J1) feeding the ATM90E26 voltage channel

Main components on the Energy meter

Energy meter bill of materials (BOM)

66 components, 31 distinct parts.

QtyPartRefs
1
ATM90E26-YU-R
U1
1
STM32F373CCTx
U2
1
USBLC6-2SC6
U3
1
AP2213M-3.3TRG1
U4
1
BM70BLES1FC2-0B03AA
U5
1
8.192MHz
Y1
1
PJ-002AH-SMT-TR
J1
1
SJ-3523-SMT-TR
J2
1
USB4105-GF-A
J3
5
SW_Nidec_CAS-120A1
SW1, SW2, SW3, SW4, SW5
1
1N4007
D1
4
LED
D2, D3, D4, D5
1
120R
FB1
2
100uF
C1, C4
5
1uF
C2, C3, C21, C22, C25
4
33nF
C5, C6, C14, C15
10
0.1uF
C7, C9, C10, C12, C13, C16, C17, C18 +2
3
10uF
C8, C19, C26
1
10nF
C11
1
10nF
C20
Show 11 more
QtyPartRefs
1
220uF
C24
2
2R4
R1, R3
5
1K
R2, R4, R6, R7, R17
1
25K
R8
1
51R
R9
2
510R
R10, R11
2
10K
R12, R20
2
22R
R13, R14
1
1K5
R15
1
10K
R16
2
5K1
R18, R19

Energy meter design files

The KiCad project lives in the Ignjat02/Energy-meter-PCB repository on GitHub; these links point at the commit this page was built from.

Energy meter: common questions

What microcontroller does the Energy meter use?

The Energy meter is built around the STM32F373CCTx, from the STM32 family.

How big is the Energy meter PCB?

The Energy meter measures 84.5 × 68.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Energy meter?

66 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Energy meter design files?

From the Ignjat02/Energy-meter-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Energy meter design in my own project?

The repository has no license, so all rights stay with Ignjat02. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Energy meter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards