Mate net monitor
ihartwig·mate-net-monitor·pcb/mate-net-monitor.kicad_pcb
About the Mate net monitor PCB
Mate net monitor is an open source PCB design by ihartwig, published on GitHub under the MIT license. It is a 2-layer board measuring 74.7 × 51.4 mm, with 64 components from 38 distinct parts.
Other key parts include the LM5085MY, 140356145100, MAX3485 and Particle_Boron. By type, the board carries 27 resistors, 13 diodes, 9 capacitors, 5 ICs, 5 connectors and 1 module.
From the project
Baseboard PCBA for MATE Net monitoring with a Particle Boron
pcb - main baseboard with connectors and interface circuits for MATE Net and Magnum Net pcb-max3100-uart-adpt - extra max3100 UART port (capable of 9N1) for MATE Net
The pcb dc-dc power supply required some rework to achieve stable operation.
Additionally, some modifications during assembly are required compared to the as-designed files here. This primarily addresses pin assignment issues:

Main components on the Mate net monitor
Mate net monitor bill of materials (BOM)
64 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM5085MY | MSOP-8-1EP_3x3mm_P0.65mm_EP1.88x2mm_ThermalVias0.3mm | U1 |
| 3 | 140356145100 TLP185 | SOIC-4_4.55x3.7mm_P2.54mm | U2, U3, U4 |
| 1 | MAX3485 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Particle_Boron | Particle_Boron_1x16_1x12_P2.54mm | A1 |
| 1 | SI2337DS-T1-E3 Si2337DS | SOT-23 | Q1 |
| 2 | 54601-906WPLF 6P6C | RJ12_Amphenol_54601 | J1, J2 |
| 1 | Conn_02x02_Odd_Even | PinSocket_2x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | RJHSE-5081 | RJ45_Amphenol_RJHSE508X | J5 |
| 1 | WM032C Enclosure_WM032C | Enclosure_WM032C | H1 |
| 1 | 7511B11 Light_Pipe_3x1_7511B11 | Light_Pipe_3x1_7511B11 | H2 |
| 3 | ATV02W600B-HF Vr=60V | D_SOD-123F | D1, D2, D3 |
| 3 | SK220ATR D_Small_ALT | D_SMA | D4, D12, D13 |
| 1 | SK220ATR D_Schottky_Small_ALT | D_SMA | D5 |
| 3 | Green | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6, D7, D8 |
| 1 | Red | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9 |
| 1 | Yellow | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D10 |
| 1 | SMF4L18CA Vr=60V | D_SOD-123F | D11 |
| 1 | SRR1210-680M 68uH 100mOhm | L_Bourns_SRR1210A | L1 |
| 2 | C3225X7S2A335K200AB 3.3uF | C_1210_3225Metric | C1, C2 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470nF | C_0805_2012Metric | C3 |
| 1 | 1nF | C_0805_2012Metric | C4 |
| 1 | 1.3nF | C_0805_2012Metric | C5 |
| 1 | 12nF | C_0805_2012Metric | C6 |
| 2 | 47uF | C_1206_3216Metric | C7, C8 |
| 1 | APXN100ARA181MF61G 180uF | CP_Elec_6.3x5.9 | C9 |
| 4 | 33k | R_0805_2012Metric | R1, R2, R5, R6 |
| 1 | 118k | R_0805_2012Metric | R3 |
| 4 | 47k | R_0805_2012Metric | R4, R7, R8, R9 |
| 1 | 845 | R_0805_2012Metric | R10 |
| 3 | 2.2k | R_0805_2012Metric | R11, R12, R13 |
| 1 | 10m 0.5W | R_1206_3216Metric | R14 |
| 1 | 80.6k | R_0805_2012Metric | R16 |
| 5 | 10k | R_0805_2012Metric | R17, R21, R22, R25, R26 |
| 1 | 3.32k | R_0805_2012Metric | R18 |
| 3 | 1k | R_0805_2012Metric | R19, R20, R24 |
| 1 | 0-DNP | R_0805_2012Metric | R23 |
| 2 | 4.7k-DNP | R_0805_2012Metric | R27, R28 |
Mate net monitor design files
The KiCad project lives in the ihartwig/mate-net-monitor repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/mate-net-monitor.kicad_pcb
- Schematicpcb/mate-net-monitor.kicad_sch
Mate net monitor: common questions
How big is the Mate net monitor PCB?
The Mate net monitor measures 74.7 × 51.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mate net monitor?
64 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mate net monitor design files?
From the ihartwig/mate-net-monitor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mate net monitor design in my own project?
Yes, under the terms of its MIT license, which ihartwig chose for the repository.