HardLabs

Reflow Hot Plate Front Panel

ikajdan·reflow-hot-plate·hardware/front_panel/front_panel.kicad_pcb

Reflow Hot Plate Front Panel PCB layout, top view — open source board by ikajdan

About the Reflow Hot Plate Front Panel PCB

Reflow Hot Plate Front Panel is an open source PCB design by ikajdan, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 30 mm, with 9 components from 9 distinct parts.

By type, the board carries 4 switches, 2 connectors, 2 diodes and 1 resistor.

It belongs with the displays & leds, sensors and power & battery designs in this gallery.

From the project

A soldering reflow hot plate based on STM32

The STM32-Based Reflow Hot Plate Project is an open-source initiative aimed at creating a reflow soldering hot plate using the STM32 microcontroller. This project provides an affordable and customizable solution for hobbyists looking to solder surface-mount components onto printed circuit boards with precision and control.

- IMS PCB heatbed capable of reaching 210°C, with uniform thermal distribution. - PID-based temperature control with ±5°C accuracy. - Redundant sensing with PT100 RTD (ADC) and K-type thermocouple (MAX6675 via SPI). - User interface with OLED (I²C), tactile buttons, and…

Reflow Hot Plate Front Panel, from the project README
From the project README

Reflow Hot Plate Front Panel bill of materials (BOM)

9 components, 9 distinct parts.

QtyPartRefs
1
Panel
J1
1
Display
J2
1
Up
SW1
1
Down
SW2
1
Left
SW3
1
Right
SW4
1
Green
D1
1
Orange
D2
1
270R
R1

Reflow Hot Plate Front Panel design files

The KiCad project lives in the ikajdan/reflow-hot-plate repository on GitHub; these links point at the commit this page was built from.

Reflow Hot Plate Front Panel: common questions

How big is the Reflow Hot Plate Front Panel PCB?

The Reflow Hot Plate Front Panel measures 80 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Reflow Hot Plate Front Panel?

9 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Reflow Hot Plate Front Panel design files?

From the ikajdan/reflow-hot-plate repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Reflow Hot Plate Front Panel design in my own project?

Yes, under the terms of its MIT license, which ikajdan chose for the repository.

More boards in reflow-hot-plate

Similar boards